DatasheetsPDF.com

CS5207-2

ON Semiconductor
Part Number CS5207-2
Manufacturer ON Semiconductor
Description Linear Regulator
Published Apr 6, 2007
Detailed Description www.DataSheet4U.com CS5207−2 7.0 A, 1.5 V Fixed Linear Regulator The CS5207−2 provides 7.0 A at 1.5 V with an accuracy ...
Datasheet PDF File CS5207-2 PDF File

CS5207-2
CS5207-2

Overview
www.
DataSheet4U.
com CS5207−2 7.
0 A, 1.
5 V Fixed Linear Regulator The CS5207−2 provides 7.
0 A at 1.
5 V with an accuracy of ±2.
0 %.
The regulator is intended for use as an active termination for the GTL bus on Intel based motherboards.
The fast loop response and low dropout voltage make these regulators ideal for applications where low voltage operation and good transient response are important.
The circuit is designed to operate with dropout voltages as low as 1.
0 V depending on the output current level.
The maximum quiescent current is only 10 mA at full load.
The regulators are fully protected against overload conditions with protection circuitry for Safe Operating Area (SOA), overcurrent and thermal shutdown.
The CS5207−2 is available in TO−220 packages.
Features • Output Current to 7.
0 A • Output Voltage Trimmed to ±2.
0% • Dropout Voltage 1.
45 V @ 7.
0 A • Fast Transient Response • Fault Protection Circuitry − Thermal Shutdown − Overcurrent Protection − Safe Area Protection 1 2 3 http://onsemi.
com TO−220 THREE LEAD T SUFFIX CASE 221A PIN CONNECTIONS AND MARKING DIAGRAMS CS5207−2 AWLYWW Tab = VOUT Pin 1.
GND 2.
VOUT 3.
VIN VIN VOUT 1 A WL, L YY, Y WW, W = Assembly Location = Wafer Lot = Year = Work Week Output Current Limit Thermal Shutdown − + Error Amplifier ORDERING INFORMATION* Device CS5207−2GT3 GND Package TO−220† Shipping 50 Units/Rail Bandgap *Additional ordering information can be found on page 5 of this data sheet.
† TO−220 is 3−pin, straight leaded.
Figure 1.
Block Diagram © Semiconductor Components Industries, LLC, 2006 September, 2006 − Rev.
8 1 Publication Order Number: CS5207−2/D CS5207−2 MAXIMUM RATINGS* Parameter Supply Voltage, VCC Operating Temperature Range Junction Temperature Storage Temperature Range Lead Temperature Soldering: ESD Damage Threshold 1.
10 second maximum.
*The maximum package power dissipation must be observed.
Wave Solder (through hole styles only) Note 1 Value 17 −40 to +70 150 −60 to +150 260 Peak 2.
0 Unit...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)