DatasheetsPDF.com

MBM29DL32xTE

Fujitsu Media Devices
Part Number MBM29DL32xTE
Manufacturer Fujitsu Media Devices
Description (MBM29DL32xTE/BE) FLASH MEMORY CMOS 32 M (4 M X 8/2 M X 16) BIT
Published Jul 30, 2007
Detailed Description www.DataSheet4U.com FUJITSU SEMICONDUCTOR DATA SHEET DS05-20881-7E FLASH MEMORY CMOS 32 M (4 M × 8/2 M × 16) BIT Dua...
Datasheet PDF File MBM29DL32xTE PDF File

MBM29DL32xTE
MBM29DL32xTE

Overview
www.
DataSheet4U.
com FUJITSU SEMICONDUCTOR DATA SHEET DS05-20881-7E FLASH MEMORY CMOS 32 M (4 M × 8/2 M × 16) BIT Dual Operation MBM29DL32XTE/BE80/90 s DESCRIPTION The MBM29DL32XTE/BE are a 32 M-bit, 3.
0 V-only Flash memory organized as 4 Mbytes of 8 bits each or 2 Mwords of 16 bits each.
These devices are designed to be programmed in-system with the standard system 3.
0 V VCC supply.
12.
0 V VPP and 5.
0 V VCC are not required for write or erase operations.
The devices can also be reprogrammed in standard EPROM programmers.
MBM29DL32XTE/BE are organized into two banks, Bank 1 and Bank 2, which are considered to be two separate memory arrays for operations.
It is the Fujitsu’s standard 3 V only Flash memories, with the additional capability of allowing a normal non-delayed read access from a non-busy bank of the array while an embedded write (either a program or an erase) operation is simultaneously taking place on the other bank.
(Continued) s PRODUCT LINE UP Part No.
Power Supply Voltage VCC (V) Max Address Access Time (ns) Max CE Access Time (ns) Max OE Access Time (ns) MBM29DL32XTE/BE 80 3.
3 +0.
3 −0.
3 90 3.
0 +0.
6 −0.
3 80 80 30 90 90 35 s PACKAGES 48-pin plastic TSOP (1) Marking Side 48-pin plastic TSOP (1) 63-ball plastic FBGA Marking Side (FPT-48P-M19) (FPT-48P-M20) (BGA-63P-M01) MBM29DL32XTE/BE80/90 (Continued) In the MBM29DL32XTE/BE, a new design concept is implemented, so called “Sliding Bank Architecture”.
Under this concept, the MBM29DL32XTE/BE can be produced a series of devices with different Bank 1/Bank 2 size combinations; 4 Mb/28 Mb, 8 Mb/24 Mb, 16 Mb/16 Mb.
To eliminate bus contention the devices have separate chip enable (CE) , write enable (WE) , and output enable (OE) controls.
The MBM29DL32XTE/BE are pin and command set compatible with JEDEC standard E2PROMs.
Commands are written to the command register using standard microprocessor write timings.
Register contents serve as input to an internal state-machine which controls the erase ...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)