DatasheetsPDF.com

29F001TPC

Macronix International
Part Number 29F001TPC
Manufacturer Macronix International
Description MX29F001TPC
Published Oct 11, 2007
Detailed Description www.DataSheet4U.com MX29F001T/B 1M-BIT [128K x 8] CMOS FLASH MEMORY FEATURES 5.0V ± 10% for read, erase and write opera...
Datasheet PDF File 29F001TPC PDF File

29F001TPC
29F001TPC

Overview
www.
DataSheet4U.
com MX29F001T/B 1M-BIT [128K x 8] CMOS FLASH MEMORY FEATURES 5.
0V ± 10% for read, erase and write operation 131072x8 only organization Fast access time: 90/120ns Low power consumption - 30mA maximum active current(5MHz) - 1uA typical standby current • Command register architecture - Byte Programming (7us typical) - Sector Erase (8K-Byte x 1, 4K-Byte x 2, 8K Byte x 2, 32K-Byte x 1, and 64K-Byte x 1) • Auto Erase (chip & sector) and Auto Program - Automatically erase any combination of sectors with Erase Suspend capability.
- Automatically programs and verifies data at specified address • Erase Suspend/Erase Resume – Suspends an erase operation to read data from, or program data to, a sector that is not being erased, then resumes the erase operation.
• • • • • Status Reply - Data polling & Toggle bit for detection of program and erase cycle completion.
• Chip protect/unprotect for 5V only system or 5V/12V system • 100,000 minimum erase/program cycles • Latch-up protected to 100mA from -1 to VCC+1V • Boot Code Sector Architecture - T = Top Boot Sector - B = Bottom Boot Sector • Low VCC write inhibit is equal to or less than 3.
2V • Package type: - 32-pin PLCC - 32-pin TSOP - 32-pin PDIP • Boot Code Sector Architecture - T=Top Boot Sector - B=Bottom Boot Sector • 20 years data retention GENERAL DESCRIPTION The MX29F001T/B is a 1-mega bit Flash memory organized as 128K bytes of 8 bits only MXIC's Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory.
The MX29F001T/B is packaged in 32-pin PLCC, TSOP, PDIP.
It is designed to be reprogrammed and erased in-system or in-standard EPROM programmers.
The standard MX29F001T/B offers access time 90ns.
To eliminate bus contention, the MX29F001T/ B has separate chip enable (CE) and output enable (OE) controls.
MXIC's Flash memories augment EPROM functionality with in-circuit electrical erasure and programming.
The MX29F001T/B uses a command register to manage this fun...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)