DatasheetsPDF.com

CCR77xxxx

Kemet Corporation
Part Number CCR77xxxx
Manufacturer Kemet Corporation
Description CERAMIC MOLDED AXIAL & RADIAL
Published Jan 23, 2008
Detailed Description www.DataSheet4U.com CERAMIC MOLDED AXIAL & RADIAL PERFORMANCE CHARACTERISTICS Insulation Resistance: C0G – 10K megohms ...
Datasheet PDF File CCR77xxxx PDF File

CCR77xxxx
CCR77xxxx


Overview
www.
DataSheet4U.
com CERAMIC MOLDED AXIAL & RADIAL PERFORMANCE CHARACTERISTICS Insulation Resistance: C0G – 10K megohms or 100 megohm - µF, whichever is less X7R – 10K megohms or 100 megohm - µF, whichever is less Dielectric Withstanding Voltage: 250% of rated voltage for 5 seconds with current limited to 50 mA.
GENERAL Working Voltage: C0G – 50, 100 & 200 Volts X7R – 50, 100 & 200 Volts Temperature Characteristics: C0G – 0 ±30 PPM/°C from -55°C to +125°C X7R – ±15% from -55°C to +125°C Capacitance Tolerance: C0G – ±0.
5 pF, ±1%, ±2%, ±5%, ±10%, ±20% (±0.
5 pF is tightest available tolerance) X7R – ±10%, ±20%, -0 +100%, -20% +80% Construction: Monolithic block of ceramic dielectric with interdigitated internal electrodes, encapsulated in a molded case, and having axial or radial leads.
Meets flame test requirements of UL Standard 94V-0.
Terminal Strength: EIA-198 Method 303 Condition A (2.
2 kg) ENVIRONMENTAL Moisture Resistance: MIL-STD-202, Method 106, or EIA-198, Method 204, Condition A, except 20 cycles.
Insulation Resistance: C0G – 10K megohms or 100 megohm - µF, whichever is less X7R – 10K megohms or 100 megohm - µF, whichever is less Dielectric Withstanding Voltage: 250% of rated voltage for 5 seconds with current limited to 50 mA.
Immersion Cycling: MIL-STD-202, Method 104, Condition B.
Post-Test limits at 25°C are: Insulation Resistance: C0G – 10K megohms or 100 megohm - µF, whichever is less X7R – 10K megohms or 100 megohm - µF, whichever is less Solderability: MIL-STD-202, Method 208, Sn62 solder, 245°C for 5 ±1/2 seconds.
Resistance to Soldering Heat: MIL-STD-202, Method 210, Condition B (260°C, 10 secs).
Depth of immersion — to a minimum of .
050" from the capacitor body.
Lead Material: Axial: Solder-coated copper clad steel Radial: Solder-coated copper ELECTRICAL Capacitance: Within specified tolerance when measured with 1 volt rms at 1 kHz (1000 pF or less at 1 MHz for C0G).
Dissipation Factor: 25°C at 1 kHz (1000 pF or less at 1 MHz for C0G).
C0G – .
1...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)