DatasheetsPDF.com

MX26LV400

Macronix International
Part Number MX26LV400
Manufacturer Macronix International
Description 4M-BIT [512Kx8/256Kx16] CMOS SINGLE VOLTAGE 3V ONLY BOOT SECTOR HIGH SPEED eLiteFlashTM MEMORY
Published Aug 6, 2008
Detailed Description MX26LV400 Macronix NBit TM Memory Family 4M-BIT [512Kx8/256Kx16] CMOS SINGLE VOLTAGE 3V ONLY BOOT SECTOR HIGH SPEED eLit...
Datasheet PDF File MX26LV400 PDF File

MX26LV400
MX26LV400

Overview
MX26LV400 Macronix NBit TM Memory Family 4M-BIT [512Kx8/256Kx16] CMOS SINGLE VOLTAGE 3V ONLY BOOT SECTOR HIGH SPEED eLiteFlashTM MEMORY FEATURES • Extended single - supply voltage range 3.
0V to 3.
6V • 524,288 x 8/262,144 x 16 switchable • Single power supply operation www.
DataSheet4U.
com - 3.
0V only operation for read, erase and program operation • Fast access time: 55/70ns • Low power consumption - 30mA maximum active current - 30uA typical standby current • Command register architecture - Byte/word Programming (typical) - Sector Erase (Sector structure 16K-Bytex1, 8K-Bytex2, 32K-Bytex1, and 64K-Byte x7) • Auto Erase (chip & sector) and Auto Program - Automatically erase any combination of sectors with Erase verify capability.
- Automatically program and verify data at specified address • Status Reply - Data# polling & Toggle bit for detection of program and erase operation completion.
• Ready/Busy# pin (RY/BY#) - Provides a hardware method of detecting program or erase operation completion.
• 2,000 minimum erase/program cycles • Latch-up protected to 100mA from -1V to VCC+1V • Boot Sector Architecture - T = Top Boot Sector - B = Bottom Boot Sector • Package type: - 48-pin TSOP - 48-ball CSP • Compatibility with JEDEC standard - Pinout and software compatible with single-power supply Flash • 20 years data retention GENERAL DESCRIPTION The MX26LV400 is a 4-mega bit high speed Flash memory organized as 512K bytes of 8 bits or 256K words of 16 bits.
MXIC's high speed Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory.
The MX26LV400 is packaged in 48-pin TSOP, and 48-ball CSP.
It is designed to be reprogrammed and erased in system or in standard EPROM programmers.
The standard MX26LV400 offers access time as fast as 55ns, allowing operation of high-speed microprocessors without wait states.
To eliminate bus contention, the MX26LV400 has separate chip enable (CE#) and output enable (OE#) controls.
MXIC's high speed Fl...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)