DatasheetsPDF.com

LPC2387

NXP Semiconductors
Part Number LPC2387
Manufacturer NXP Semiconductors
Description Single-chip 16-bit/32-bit microcontrollers
Published Jan 11, 2009
Detailed Description LPC2387 Single-chip 16-bit/32-bit microcontrollers; 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC...
Datasheet PDF File LPC2387 PDF File

LPC2387
LPC2387

Overview
LPC2387 Single-chip 16-bit/32-bit microcontrollers; 512 kB flash with ISP/IAP, Ethernet, USB 2.
0, CAN, and 10-bit ADC/DAC Rev.
02 — 1 February 2008 Product data sheet 1.
General description www.
DataSheet4U.
com The LPC2387 microcontroller is based on a 16-bit/32-bit ARM7TDMI-S CPU with real-time emulation that combines the microcontroller with 512 kB of embedded high-speed flash memory.
A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at the maximum clock rate.
For critical performance in interrupt service routines and DSP algorithms, this increases performance up to 30 % over Thumb mode.
For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty.
The LPC2387 is ideal for multi-purpose serial communication applications.
It incorporates a 10/100 Ethernet Media Access Controller (MAC), USB full speed device with 4 kB of endpoint RAM, four UARTs, two CAN channels, an SPI interface, two Synchronous Serial Ports (SSP), three I2C interfaces, and an I2S interface.
This blend of serial communications interfaces combined with an on-chip 4 MHz internal oscillator, 64 kB SRAM, 16 kB SRAM for Ethernet, 16 kB SRAM for USB and general purpose use, together with 2 kB battery powered SRAM makes this device very well suited for communication gateways and protocol converters.
Various 32-bit timers, an improved 10-bit ADC, 10-bit DAC, one PWM unit, a CAN control unit, and up to 70 fast GPIO lines with up to 12 edge or level sensitive external interrupt pins make this microcontroller particularly suitable for industrial control and medical systems.
2.
Features I ARM7TDMI-S processor, running at up to 72 MHz.
I 512 kB on-chip flash program memory with In-System Programming (ISP) and In-Application Programming (IAP) capabilities.
Flash program memory is on the ARM local bus for high performance CPU access.
I 64 kB of SRAM on the ARM local bus for high performance C...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)