DatasheetsPDF.com

UWS1H220MCL1GS

Part Number	UWS1H220MCL1GS
Manufacturer	Nichicon
Description	Aluminum Electrolytic SMT High Temp Reflow Capacitor
Published	Apr 27, 2009
Detailed Description	ALUMINUM ELECTROLYTIC CAPACITORS WS Chip Type, High CV High Temperature (260°C) Reflow series Corresponding with 260°...
Datasheet	UWS1H220MCL1GS PDF File

Overview

ALUMINUM ELECTROLYTIC CAPACITORS WS Chip Type, High CV High Temperature (260°C) Reflow series Corresponding with 260°C peak reflow soldering Recomended reflow condition : 260°C peak 5 sec.
230°C over 60 sec.
2 times (φ8 × 6.
2, φ10 × 10 : 1 time) Chip type higher capacitance in large case size.
Applicable to automatic mounting machine using carrier tape.
Adapted to the RoHS directive (2002/95/EC).
WS High Temperature www.
datasheet4u.
com Reflow UR Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current Tangent of loss angle (tan δ) Performance Characteristics – 40 to +85°C 6.
3 to 50V 22 to 1500µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage, leakage current is not more than 0.
03CV (µA) .
Measurement frequency : 120Hz, Temperature : 20°C Rated voltage (V) tan δ (MAX.
) 6.
3 0.
28 10 0.
24 6.
3 5 10 16 0.
20 10 4 8 25 0.
16 16 3 6 35 0.
14 25 2 4 35 2 3 50 0.
12 Measurement frequency: 120Hz Stability at Low Temperature Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.
) Z– 40°C / Z+20°C 50 2 3 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C.
Capacitance change tan δ Leakage current Within ±20% of initial value 200% or less of initial specified value Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.
1 at 20°C, they will meet the specified value for endurance characteristics listed above.
The capacitors shall be kept on the hot plate maintained at 250°C for 30 seconds.
After removing from the hot plate, the capacitors meet the characteristic requirements listed at right when they are restored to 20°C.
Black print on the case top.
Capacitance change tan δ Leakage current Resistance to soldering he...

Similar Datasheet

UWS1H220MCL1GS Aluminum Electrolytic SMT High Temp Reflow Capacitor - Nichicon

@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)