DatasheetsPDF.com

S-AV35A

Toshiba Semiconductor
Part Number S-AV35A
Manufacturer Toshiba Semiconductor
Description RF POWER AMPLIFIER MODULE FM RF POWER AMPLIFIER MODULE
Published May 7, 2009
Detailed Description S-AV35A TOSHIBA RF POWER AMPLIFIER MODULE S-AV35A FM RF POWER AMPLIFIER MODULE FOR 32-W COMMERCIAL VHF RADIO APPLICATIO...
Datasheet PDF File S-AV35A PDF File

S-AV35A
S-AV35A

Overview
S-AV35A TOSHIBA RF POWER AMPLIFIER MODULE S-AV35A FM RF POWER AMPLIFIER MODULE FOR 32-W COMMERCIAL VHF RADIO APPLICATIONS www.
datasheet4u.
com ･Power Gain: 35 dB (Min.
) ･Total Efficiency: 50% (Min.
) ABSOLUTE MAXIMUM RATINGS (Tc = 25°C, IT < 8 A, ZG = ZL = 50Ω) CHARACTERISTICS Maximum Current Power Supply Voltage Control Voltage Instantaneous Output Power Input Power Operating Case Temperature Storage Temperature SYMBOL IT VDD VGG Pomax Pi Tc (opr) Tstg VGG = 0 V (GND), RF: none 10.
5 ≤ VDD ≤ 16.
5 V, Pi = 10 mW VGG ≤ 5.
5 V, Pi = 10 mW, 10.
5 ≤ VDD ≤ 16.
5V, within 2 seconds 10.
5 ≤ VDD ≤ 16.
5 V, VGG ≤ 5.
5 V 10.
5 ≤ VDD ≤ 16.
5 V, VGG ≤ 5.
5 V, Pi = 10 mW (Note 2) TEST CONDITION RATING 8 16.
5 5.
5 45 20 -30 to 100 -40 to 110 UNIT A V V W mW °C °C Note 1: The maximum ratings are the limits that must not be exceeded even for an instant, under worst possible conditions.
Exceeding the ratings may cause device damage, ignition, or deterioration.
Therefore, when designing the circuitry, derating factors should be applied so that the absolute maximum ratings are not exceeded.
Note 2: The output power rating satisfies the range shown in Figures 1 and 2 according to the operating case temperature.
Ensure that the device should be operated within the specified operating range.
The figures below indicate the output power obtained 2 seconds after Po is generated.
Pomax-Tc 35 30 25 20 15 10 5 0 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 Tc (℃) PDmax-Tc 100 90 80 70 PDmax(W) 60 50 40 30 20 10 0 -30 -20 -10 0 10 20 30 40 Tc(℃) 50 60 70 80 90 100 Pomax(W) Power dissipation (PD) PD = (VDD × IDD) – Po + Pi Figure 1 Pomax-Tc Figure 2 PDmax-Tc *When the device is used at Tc =100°C, the output power rating is 23 W as shown in Figure 1.
When the power dissipation at Tc = 100°C exceeds the rating shown in Figure 2, the output derating is required to limit the dissipation within the specified range.
Note 3: The case temperature is monitored using the screw terminal blocks on the input side...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)