DatasheetsPDF.com

AD7216N2L

Emerson
Part Number AD7216N2L
Manufacturer Emerson
Description AC-DC / External Freestanding Adapter
Published Oct 24, 2009
Detailed Description Embedded Power for Business-Critical Continuity AD7216N2L 72 Watts Total Power: Input Voltage: # of Outputs: 72 Watts 9...
Datasheet PDF File AD7216N2L PDF File

AD7216N2L
AD7216N2L

Overview
Embedded Power for Business-Critical Continuity AD7216N2L 72 Watts Total Power: Input Voltage: # of Outputs: 72 Watts 90 - 264 Vac Single Rev.
04.
16.
08 AD7216N2L 1 of 2 RoHS Electrical Specifications Input Special Features • Class II • Universal AC input • Fully regulated output • Overvoltage and short circuit protection • Constant voltage • High efficiency • IEC320 AC receptacle, 2 pin (type C8) • Built in EMI filter www.
DataSheet4U.
com • (CISPR 22 Class B) • AC Input fuse • Complies with Blue Angel requirement Input range: Frequency: Input current: Efficiency: EMI/RFI: Safety ground leakage current: 90-264 Vac (wide range) 47-63 Hz 2 A maximum 85% typical FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B 0.
5 mA maximum@ 50/60 Hz, 264 Vac input Output Maximum Power (Po): Hold-up time: 72 W 10 ms.
minimum at full load @ 120 Vac Short current protection: Auto recover Thermal protection: Internally protected; output will latch off Cable/connector: Overvoltage protection: DC cable length 2.
1 mm center plug, right angle DC plug center +v DC plug outer -v 20 - 23 V; Lataching type, recycle ac to reset Environmental Specifications Operating temperature: Storage temperature: Electromagnetic susceptibility: Humidity: +5° to +40°C ambient -10°C to +70°C Designed to meet EN61000-4-2, -4, level 2; EN61000-4-5, Level 3 Operating; non-condensing 5% to 90% RH Safety UL: CuL: PSE: CB: UL 60950-1 60950-1 Denan Certificate and report Embedded Power for Business-Critical Continuity Ordering Information Model Number AD7216N2L Americas Output Voltage 16 V Maximum Load 4.
5 A Peak Load 4.
75 A 1 Rev.
04.
16.
08 AD7216N2L 2 of 2 Maximum Power 72 W Regulation ±5% 2 Ripple P/P (PARD)3 <250mV 1.
Peak current lasting <4 seconds with a maximum 10% duty cycle.
2.
At 25ºC including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
3.
Peak-to-peak with 20MHz bandwidth and 10μF (tantalum capacitor) in parallel with a 0.
1μF c...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)