DatasheetsPDF.com

LPS173-M-C

Emerson
Part Number LPS173-M-C
Manufacturer Emerson
Description AC-DC / 136W - 260W Medical
Published Oct 25, 2009
Detailed Description Embedded Power for Business-Critical Continuity LPS170-M Series Medical 175 Watts Total Power: Input Voltage: # o...
Datasheet PDF File LPS173-M-C PDF File

LPS173-M-C
LPS173-M-C

Overview
Embedded Power for Business-Critical Continuity LPS170-M Series Medical 175 Watts Total Power: Input Voltage: # of Outputs: 100 - 175 Watts 85-264 VAC 120-300 VDC Single Rev.
12.
08.
08_113 LPS170-M Series  of 3 Electrical Specifications Special Features • • • • • • • • • • • • • • • Medical safety approvals Active power factor correction IEC EN61000-3-2 compliance Wide Range Adjustable output Remote sense on main output Single wire current sharing Power fail and remote inhibit Built-in EMI filter Low output ripple Overvoltage protection Overload protection Thermal overload protection DC power good 5 V standby output 12 V Aux output Optional cover (-C suffix) Input Input ra­nge: Frequency: Inrush current: Efficiency: EMI filter: 85-264 VAC; 120-300 VDC 47-67 Hz 38 A max, cold start @ 25 °C 75% typical at full load FCC Class B conducted CISPR 22 Class B conducted EN55022 Class B conducted VDE 0878 PT3 Class B conducted 0.
99 typical <250 µA @ 50/60 Hz, 264 VAC inputS Power Factor: Safety ground leakage current: Output Maximum power: 110 W convection (75 W with cover) 175 W with 30 CFM forced air (130 W with cover) 2:1 wide ratio minimum 5 V @ 2 A regulated ±5% 20 ms @175 W load at nominal line Short circuit protection on all outputs.
Case overload protected @ 110-145% above peak rating 12 V @ 1 A -5 %, +10% Adjustment range: Standby outputs: Hold-up time: Safety • • • • VDE UL CSA CE 0750/EN60601-1 (IEC601) UL2601 CSA 22.
2 No.
601.
1 Mark (LVD) Overload protection: Overvoltage protection: 10% to 40% above nominal output Aux output: Embedded Power for Business-Critical Continuity Logic Control Power failure: Remote inhibit: Remote sense: DC - OK:  TL logic signal goes high 100 - 500 msec after V1 output; It goes low T at least 4 msec before loss of regulation Requires contact closure to inhibit outputs  ompensates for 0.
5 V lead drop min.
Will operate without remote C sense connected.
Reverse connection protected.
...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)