DatasheetsPDF.com

VNQ810M-E

STMicroelectronics
Part Number VNQ810M-E
Manufacturer STMicroelectronics
Description QUAD CHANNEL HIGH SIDE DRIVER
Published Apr 11, 2010
Detailed Description www.DataSheet4U.com VNQ810M-E QUAD CHANNEL HIGH SIDE DRIVER Table 1. General Features Type VNQ810M-E (*) Per each chann...
Datasheet PDF File VNQ810M-E PDF File

VNQ810M-E
VNQ810M-E

Overview
www.
DataSheet4U.
com VNQ810M-E QUAD CHANNEL HIGH SIDE DRIVER Table 1.
General Features Type VNQ810M-E (*) Per each channel Figure 1.
Package Iout 0.
6A (*) RDS(on) 150mΩ (*) VCC 36V CMOS COMPATIBLE INPUTS OPEN DRAIN STATUS OUTPUTS s ON STATE OPEN LOAD DETECTION s OFF STATE OPEN LOAD DETECTION s SHORTED LOAD PROTECTION s UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN s PROTECTION AGAINST LOSS OF GROUND s VERY LOW STAND-BY CURRENT s s SO-28 (DOUBLE ISLAND) REVERSE BATTERY PROTECTION (**) s IN COMPLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE s DESCRIPTION The VNQ810M-E is a quad HSD formed by assembling two VND810M-E chips in the same SO-28 package.
The VNQ810M-E is a monolithic device made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground.
Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table).
Active current limitation combined with thermal shutdown and automatic restart protects the device against overload.
The current limitation threshold is aimed at detecting the 21W/12V standard bulb as an overload fault.
The device detects open load condition both in on and off state .
Output shorted to VCC is detected in the off state.
Device automatically turns off in case of ground pin disconnection.
Table 2.
Order Codes Package Tube VNQ810M-E Tape and Reel VNQ810MTR-E SO-28 Note: (**) See application schematic at page 10 Rev.
1 October 2004 1/21 www.
DataSheet4U.
com VNQ810M-E Figure 2.
Block Diagram VCC1,2 Vcc CLAMP OVERVOLTAGE UNDERVOLTAGE GND1,2 CLAMP 1 OUTPUT1 DRIVER 1 CLAMP 2 INPUT1 STATUS1 CURRENT LIMITER 1 LOGIC OVERTEMP.
1 OPENLOAD ON 1 CURRENT LIMITER 2 INPUT2 OPENLOAD OFF 1 STATUS2 OPENLOAD ON 2 DRIVER 2 OUTPUT2 OPENLOAD OFF 2 OVERTEMP.
2 VCC3,4 Vcc CLAMP OVERVOLTAGE UNDERVOLTAGE GND3,4 INPUT3 CLAMP 3 OUTPUT3 DRIVER 3 CLAMP 4 STATUS3 CURRENT LIMITER 3 LOGIC OVERTEMP.
3 OPENLOAD ON 3 CURRENT LIMITER 4 INPUT4 OPEN...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)