DatasheetsPDF.com

MIC4124

Part Number	MIC4124
Manufacturer	Micrel Semiconductor
Description	Dual 3A-Peak Low-Side MOSFET Driver
Published	Apr 12, 2010
Detailed Description	MIC4123/4124/4125 Micrel, Inc. MIC4123/4124/4125 Dual 3A-Peak Low-Side MOSFET Driver Bipolar/CMOS/DMOS Process www.Dat...
Datasheet	MIC4124 PDF File

Overview

MIC4123/4124/4125 Micrel, Inc.
MIC4123/4124/4125 Dual 3A-Peak Low-Side MOSFET Driver Bipolar/CMOS/DMOS Process www.
DataSheet4U.
com General Description The MIC4123/4124/4125 family are highly reliable BiCMOS/DMOS buffer/driver/MOSFET drivers.
They are higher output current versions of the MIC4126/4127/4128, which are improved versions of the MIC4426/4427/4428.
All three families are pin-compatible.
The MIC4123/4124/4125 drivers are capable of giving reliable service in more demanding electrical environments than their predecessors.
They will not latch under any conditions within their power and voltage ratings.
They can survive up to 5V of noise spiking, of either polarity, on the ground pin.
They can accept, without either damage or logic upset, up to half an amp of reverse current (either polarity) forced back into their outputs.
The MIC4123/4124/4125 series drivers are easier to use, more ﬂexible in operation, and more forgiving than other CMOS or bipolar drivers currently available.
Their BiCMOS/DMOS construction dissipates minimum power and provides rail-torail voltage swings.
Primarily intended for driving power MOSFETs, the MIC4123/4124/4125 drivers are suitable for driving other loads (capacitive, resistive, or inductive) which require low-impedance, high peak currents, and fast switching times.
Heavily loaded clock lines, coaxial cables, or piezoelectric transducers are some examples.
The only known limitation on loading is that total power dissipated in the driver must be kept within the maximum power dissipation limits of the package.
Features • • • • • • • • • • • • • • • • • Reliable, low-power bipolar/CMOS/DMOS construction Latch-up protected to >200mA reverse current Logic input withstands swing to –5V High 3A-peak output current Wide 4.
5V to 20V operating range Drives 1800pF capacitance in 25ns Short <50ns typical delay time Delay times consistent with in supply voltage change Matched rise and fall times TTL logic input independent of supply volta...

Similar Datasheet

MIC4100 100V Half Bridge MOSFET Drivers - Micrel Semiconductor
MIC4101 100V Half Bridge MOSFET Drivers - Micrel Semiconductor
MIC4102 100V Half-Bridge MOSFET Driver - Microchip
MIC4102 100V Half Bridge MOSFET Driver - Micrel Semiconductor
MIC4103 100V Half Bridge MOSFET Drivers 3/2A Sinking/Sourcing Current - Micrel Semiconductor
MIC4104 100V Half Bridge MOSFET Drivers 3/2A Sinking/Sourcing Current - Micrel Semiconductor
MIC4120 6A-Peak Low-Side MOSFET Driver - Micrel Semiconductor
MIC4123 Dual 3A-Peak Low-Side MOSFET Driver - Micrel Semiconductor
MIC4123 Dual 3A Peak Low-Side MOSFET Drivers - Microchip
MIC4124 Dual 3A-Peak Low-Side MOSFET Driver - Micrel Semiconductor

@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)