DatasheetsPDF.com

AT49BV802DT

ATMEL Corporation
Part Number AT49BV802DT
Manufacturer ATMEL Corporation
Description 8-megabit (512K x 16/ 1M x 8) 3-volt Only Flash Memory
Published Oct 4, 2010
Detailed Description www.DataSheet4U.com Features • Single Voltage Read/Write Operation: 2.65V to 3.6V • Access Time – 70 ns • Sector Erase ...
Datasheet PDF File AT49BV802DT PDF File

AT49BV802DT
AT49BV802DT

Overview
www.
DataSheet4U.
com Features • Single Voltage Read/Write Operation: 2.
65V to 3.
6V • Access Time – 70 ns • Sector Erase Architecture – Fifteen 32K Word (64K Bytes) Sectors with Individual Write Lockout – Eight 4K Word (8K Bytes) Sectors with Individual Write Lockout Fast Byte/Word Program Time – 10 µs Fast Sector Erase Time – 100 ms Suspend/Resume Feature for Erase and Program – Supports Reading and Programming from Any Sector by Suspending Erase of a Different Sector – Supports Reading Any Byte/Word in the Non-suspending Sectors by Suspending Programming of Any Other Byte/Word Low-power Operation – 10 mA Active – 15 µA Standby Data Polling, Toggle Bit, Ready/Busy for End of Program Detection RESET Input for Device Initialization Sector Lockdown Support TSOP and CBGA Package Options Top or Bottom Boot Block Configuration Available 128-bit Protection Register Minimum 100,000 Erase Cycles Common Flash Interface (CFI) Green (Pb/Halide-free) Packaging • • • • • • • • • • • • • 8-megabit (512K x 16/ 1M x 8) 3-volt Only Flash Memory AT49BV802D AT49BV802DT 1.
Description The AT49BV802D(T) is a 2.
7-volt 8-megabit Flash memory organized as 524,288 words of 16 bits each or 1,048,576 bytes of 8 bits each.
The x16 data appears on I/O0 - I/O15; the x8 data appears on I/O0 - I/O7.
The memory is divided into 23 sectors for erase operations.
The AT49BV802D(T) is offered in a 48-lead TSOP and a 48-ball CBGA package.
The device has CE and OE control signals to avoid any bus contention.
This device can be read or reprogrammed using a single power supply, making it ideally suited for in-system programming.
The device powers on in the read mode.
Command sequences are used to place the device in other operation modes such as program and erase.
The device has the capability to protect the data in any sector (see “Sector Lockdown” section).
To increase the flexibility of the device, it contains an Erase Suspend and Program Suspend feature.
This feature will put the erase or program on...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)