DatasheetsPDF.com

FSCT17A-UH5

Part Number	FSCT17A-UH5
Manufacturer	STMicroelectronics
Description	FAN SPEED CONTROLER
Published	Apr 7, 2011
Detailed Description	® FSCTxxA-UH5 A.S.D.TM Application Specific Discretes FAN SPEED CONTROLER APPLICATIONS COMPUTER AND SERVER POWER SUP...
Datasheet	FSCT17A-UH5 PDF File

Overview

® FSCTxxA-UH5 A.
S.
D.
TM Application Specific Discretes FAN SPEED CONTROLER APPLICATIONS COMPUTER AND SERVER POWER SUPPLY TELECOM LOW COST VENTILATION (consumer) s s s FEATURES Built in thermal sensor Brushless DC fan speed control Linear control and regulation of the fan speed according to the temperature Green OFF mode operation with automatic turn- ON in case of overtemperature Voltage limitation above fan stall voltage No external NTC required s s s s s s 5 1 IPPAK Fig.
1: Block Diagram.
ON BENEFITS Low cost integrated fan speed control High integration: only one or two external components Reduced acoustic noise because of the linear control of the external transistor Power supply noise rejection Good thermal coupling with heater Reduced ON/OFF oscillation because of large hysteresis High current capability (base current higher than 10 mA) Higher accuracy than discrete circuit with NTC s s s s s s s s BIAS FSCTxxA-UH5 F VCC VOLTAGE REF.
ON/OFF LOW HYSTERESIS COMPARATOR HYST.
-EN ON/OFF HIGH ON REGULATION OUT TEMP.
SENSOR VT DRIVER COUT= 100nF GND GENERAL DESCRIPTION The FSCTxxA-UH5 is a high-integrated low cost fan speed controller suitable for PC desktops, notebooks and server power supplies and also all kind of equipments where low cost ventilation system is needed.
An internal thermal sensor connected to the tab is used to regulate the fan speed.
A continuous analog voltage proportional to the tab temperature is produced at the OUT terminal and can control linearly an external PNP transistor (Fan Transistor) connected in series with a Brushless DC Fan, in order to vary its speed.
The ON control terminal can be used to select two operation modes.
If not connected (high impedance state) ON mode is selected by default.
In Mode ON, the fan speed is regulated according to the tab temperature of the FSCT by adjusting the Vbe voltage of the PNP fan Transistor.
In low temperature conditions, the fan transistor voltage is limited to about 5.
5V (for a 12V...

Similar Datasheet

FSCT17A-UH5 FAN SPEED CONTROLER - STMicroelectronics

@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)