DatasheetsPDF.com

FAN5400

Fairchild Semiconductor
Part Number FAN5400
Manufacturer Fairchild Semiconductor
Description USB-Compliant Single-Cell Li-Ion Switching Charger
Published Feb 22, 2012
Detailed Description www.DataSheet.co.kr FAN5400 Family — USB-Compliant Single-Cell Li-Ion Switching Charger with USB-OTG Boost Regulator S...
Datasheet PDF File FAN5400 PDF File

FAN5400
FAN5400

Overview
www.
DataSheet.
co.
kr FAN5400 Family — USB-Compliant Single-Cell Li-Ion Switching Charger with USB-OTG Boost Regulator September 2011 FAN5400 / FAN5401 / FAN5402 / FAN5403 / FAN5404 / FAN5405 USB-Compliant Single-Cell Li-Ion Switching Charger with USB-OTG Boost Regulator Features          Fully Integrated, High-Efficiency Charger for Single-Cell Li-Ion and Li-Polymer Battery Packs Faster Charging than Linear Charge Voltage Accuracy: 0.
5% at 25°C 1% from 0 to 125°C Description The FAN5400 family (FAN540X) combines a highly integrated switch-mode charger, to minimize single-cell Lithium-ion (Li-ion) charging time from a USB power source, and a boost regulator to power a USB peripheral from the battery.
The charging parameters and operating modes are 2 programmable through an I C Interface that operates up to 3.
4Mbps.
The charger and boost regulator circuits switch at 3MHz to minimize the size of external passive components.
The FAN540X provides battery charging in three phases: conditioning, constant current, and constant voltage.
To ensure USB compliance and minimize charging time, the 2 input current is limited to the value set through the I C host.
Charge termination is determined by a programmable minimum current level.
A safety timer with reset control provides a safety backup for the I2C host.
The integrated circuit (IC) automatically restarts the charge cycle when the battery falls below an internal threshold.
If the input source is removed, the IC enters a high-impedance mode with leakage from the battery to the input prevented.
Charge status is reported back to the host through the I2C port.
Charge current is reduced when the die temperature reaches 120°C.
The FAN540X can operate as a boost regulator on command from the system.
The boost regulator includes a soft-start that limits inrush current from the battery.
The FAN540X is available in a 1.
96 x 1.
87mm, 20-bump, 0.
4mm pitch WLCSP package.
L1 1H 0.
1F 5% Input Current Regulation Accuracy 5...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)