DatasheetsPDF.com

NX3DV2567

Part Number	NX3DV2567
Manufacturer	NXP Semiconductors
Description	Low-ohmic four-pole double-throw analog switch
Published	Feb 28, 2012
Detailed Description	www.DataSheet.co.kr NX3DV2567 Low-ohmic four-pole double-throw analog switch Rev. 1 — 28 September 2010 Product data sh...
Datasheet	NX3DV2567 PDF File

Overview

www.
DataSheet.
co.
kr NX3DV2567 Low-ohmic four-pole double-throw analog switch Rev.
1 — 28 September 2010 Product data sheet 1.
General description The NX3DV2567 is a four-pole double-throw analog switch (4PDT) optimized for switching WLAN-SIM supply, data and control signals.
It has one digital select input (S) and four switches each with two independent input/outputs (nY0 and nY1) and a common input/output (nZ).
Schmitt trigger action at S makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 1.
4 V to 4.
3 V.
A low input voltage threshold allows pin S to be driven by lower level logic signals without significant increase in supply current ICC.
This makes it possible for the NX3DV2567 to switch 4.
3 V signals with a 1.
8 V digital controller, eliminating the need for logic level translation.
The NX3DV2567 allows signals with amplitude up to VCC to be transmitted from nZ to nY0 or nY1; or from nY0 or nY1 to nZ.
.
2.
Features and benefits Wide supply voltage range from 1.
4 V to 4.
3 V Very low ON resistance for supply path: 0.
5 Ω (typical) at VCC = 1.
8 V 0.
45 Ω (typical) at VCC = 2.
7 V Low ON resistance for data path: 7 Ω (typical) at VCC = 1.
8 V 6 Ω (typical) at VCC = 2.
7 V Low ON capacitance for data path Wide −3 db bandwidth > 160 MHz Break-before-make switching High noise immunity ESD protection: HBM JESD22-A114F Class 3A exceeds 4000 V HBM JESD22-A114F Class 3A I/O to GND exceeds 7000 V CDM AEC-Q100-011 revision B exceeds 1000 V CMOS low-power consumption Latch-up performance exceeds 100 mA per JESD 78B Class II Level A 1.
8 V control logic at VCC = 3.
6 V Control input accepts voltages above supply voltage Very low supply current, even when input is below VCC High current handling capability (350 mA continuous current under 3.
3 V supply for supply path switch) Datasheet pdf - http://www.
DataSheet4U.
net/ www.
DataSheet.
co.
kr NXP Semiconductors NX3DV2567 Low-ohmic four-pole double-th...

Similar Datasheet

NX3DV2567 Low-ohmic four-pole double-throw analog switch - NXP Semiconductors

@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)