DatasheetsPDF.com

74HCT4351

NXP Semiconductors
Part Number 74HCT4351
Manufacturer NXP Semiconductors
Description 8-channel analog multiplexer/demultiplexer
Published Aug 28, 2012
Detailed Description INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: • The IC06 74HC/HCT/HCU/HCMOS Logic Fam...
Datasheet PDF File 74HCT4351 PDF File

74HCT4351
74HCT4351

Overview
INTEGRATED CIRCUITS DATA SHEET For a complete data sheet, please also download: • The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications • The IC06 74HC/HCT/HCU/HCMOS Logic Package Information • The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines www.
DataSheet.
net/ 74HC/HCT4351 8-channel analog multiplexer/demultiplexer with latch Product specification File under Integrated Circuits, IC06 December 1990 Datasheet pdf - http://www.
DataSheet4U.
co.
kr/ Philips Semiconductors Product specification 8-channel analog multiplexer/demultiplexer with latch FEATURES • Wide analog input voltage range: ±5V • Low “ON” resistance: 80 Ω (typ.
) at VCC − VEE = 4.
5 V 70 Ω (typ.
) at VCC − VEE = 6.
0 V 60 Ω (typ.
) at VCC − VEE = 9.
0 V • Logic level translation: to enable 5 V logic to communicate with ± 5 V analog signals • Typical “break before make” built in • Address latches provided • Output capability: non-standard • ICC category: MSI GENERAL DESCRIPTION The 74HC/HCT4351 are high-speed Si-gate CMOS devices.
They are specified in compliance with JEDEC standard no.
7A.
74HC/HCT4351 The 74HC/HCT4351 are 8-channel analog multiplexers/demultiplexers with three select inputs (S0 to S2), two enable inputs (E1 and E2), a latch enable input (LE), eight independent inputs/outputs (Y0 to Y7) and a common input/output (Z).
With E1 LOW and E2 is HIGH, one of the eight switches is selected (low impedance ON-state) by S0 to S2.
The data at the select inputs may be latched by using the active LOW latch enable input (LE).
When LE is HIGH the latch is transparent.
When either of the two enable inputs, E1 (active LOW) and E2 (active HIGH), is inactive, all 8 analog switches are turned off.
VCC and GND are the supply voltage pins for the digital control inputs (S0 to S2, LE, E1 and E2).
The VCC to GND ranges are 2.
0 to 10.
0 V for HC and 4.
5 to 5.
5 V for HCT.
The analog inputs/outputs (Y0 to Y7, and Z) can swing between VCC as a positive limit and VEE as a negative limit.
VCC − VEE may not exceed 10.
...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)