DatasheetsPDF.com

PCA9624

NXP Semiconductors
Part Number PCA9624
Manufacturer NXP Semiconductors
Description LED driver
Published Nov 1, 2012
Detailed Description PCA9624 8-bit Fm+ I2C-bus 100 mA 40 V LED driver Rev. 4.1 — 18 January 2016 Product data sheet 1. General description ...
Datasheet PDF File PCA9624 PDF File

PCA9624
PCA9624

Overview
PCA9624 8-bit Fm+ I2C-bus 100 mA 40 V LED driver Rev.
4.
1 — 18 January 2016 Product data sheet 1.
General description The PCA9624 is an I2C-bus controlled 8-bit LED driver optimized for voltage switch dimming and blinking 100 mA Red/Green/Blue/Amber (RGBA) LEDs.
Each LED output has its own 8-bit resolution (256 steps) fixed frequency individual PWM controller that operates at 97 kHz with a duty cycle that is adjustable from 0 % to 99.
6 % to allow the LED to be set to a specific brightness value.
An additional 8-bit resolution (256 steps) group PWM controller has both a fixed frequency of 190 Hz and an adjustable frequency between 24 Hz to once every 10.
73 seconds with a duty cycle that is adjustable from 0 % to 99.
6 % that is used to either dim or blink all LEDs with the same value.
Each LED output can be off, on (no PWM control), set at its individual PWM controller value or at both individual and group PWM controller values.
The PCA9624 operates with a supply voltage range of 2.
3 V to 5.
5 V and the 100 mA open-drain outputs allow voltages up to 40 V.
The PCA9624 is one of the first LED controller devices in a new Fast-mode Plus (Fm+) family.
Fm+ devices offer higher frequency (up to 1 MHz) and more densely populated bus operation (up to 4000 pF).
The active LOW Output Enable input pin (OE) blinks all the LED outputs and can be used to externally PWM the outputs, which is useful when multiple devices must be dimmed or blinked together without using software control.
Software programmable LED Group and three Sub Call I2C-bus addresses allow all or defined groups of PCA9624 devices to respond to a common I2C-bus address, allowing for example, all red LEDs to be turned on or off at the same time or marquee chasing effect, thus minimizing I2C-bus commands.
Seven hardware address pins allow up to 126 devices on the same bus.
The Software Reset (SWRST) Call allows the master to perform a reset of the PCA9624 through the I2C-bus, identical to the Power-On Reset (POR) th...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)