DatasheetsPDF.com

LPC1104

NXP
Part Number LPC1104
Manufacturer NXP
Description (LPC1102 / LPC1104) 32-bit ARM Cortex-M0 microcontroller
Published Nov 23, 2012
Detailed Description LPC1102/1104 32-bit ARM Cortex-M0 microcontroller; 32 kB flash and 8 kB SRAM Rev. 7 — 26 September 2013 Product data ...
Datasheet PDF File LPC1104 PDF File

LPC1104
LPC1104

Overview
LPC1102/1104 32-bit ARM Cortex-M0 microcontroller; 32 kB flash and 8 kB SRAM Rev.
7 — 26 September 2013 Product data sheet 1.
General description The LPC1102/1104 are an ARM Cortex-M0 based, low-cost 32-bit MCU, designed for 8/16-bit microcontroller applications, offering performance, low power, simple instruction set and memory addressing together with reduced code size compared to existing 8/16-bit architectures.
The LPC1102/1104 operate at CPU frequencies of up to 50 MHz.
The peripheral complement of the LPC1102/1104 includes 32 kB of flash memory, 8 kB of data memory, one RS-485/EIA-485 UART, one SPI interface with SSP features, four general purpose counter/timers, a 10-bit ADC, and 11 general purpose I/O pins.
Remark: The LPC1104 has a revised pinout and contains several features not found in the LPC1102: • Two extra GPIO pins (PIO0_1 and PIO0_6).
• Extra match output (CT32B0_MAT2).
• CLKOUT feature.
• Easier re-entry to ISP via PIO0_1.
• SSP0_CLK available on two pins (A1 and A2) to support debugging of SSP communication.
• Better positioning of the XTALIN pin for easier PCB layout.
2.
Features and benefits  System:  ARM Cortex-M0 processor, running at frequencies of up to 50 MHz.
 ARM Cortex-M0 built-in Nested Vectored Interrupt Controller (NVIC).
 Serial Wire Debug.
 System tick timer.
 Memory:  32 kB on-chip flash programming memory.
 8 kB SRAM.
 In-Application Programming (IAP) and In-System Programming (ISP) support via on-chip bootloader software.
 Digital peripherals:  11 General Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors and programmable open-drain mode.
NXP Semiconductors LPC1102/1104 32-bit ARM Cortex-M0 microcontroller  GPIO pins can be used as edge and level sensitive interrupt sources.
 Four general purpose counter/timers with a total of one capture input and 10 match outputs.
 Programmable windowed WatchDog Timer (WDT).
 Analog peripherals:  10-bit ADC with input multiplexing among five pins.
 Se...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)