DatasheetsPDF.com

MT29F2G08ABBEAHC

Micron
Part Number MT29F2G08ABBEAHC
Manufacturer Micron
Description 2Gb NAND Flash Memory
Published Nov 16, 2013
Detailed Description Micron Confidential and Proprietary 2Gb: x8, x16 NAND Flash Memory Features NAND Flash Memory MT29F2G08ABAEAH4, MT29F2...
Datasheet PDF File MT29F2G08ABBEAHC PDF File

MT29F2G08ABBEAHC
MT29F2G08ABBEAHC

Overview
Micron Confidential and Proprietary 2Gb: x8, x16 NAND Flash Memory Features NAND Flash Memory MT29F2G08ABAEAH4, MT29F2G08ABAEAWP, MT29F2G08ABBEAH4 MT29F2G08ABBEAHC, MT29F2G16ABAEAWP, MT29F2G16ABBEAH4 MT29F2G16ABBEAHC Features • Open NAND Flash Interface (ONFI) 1.
0-compliant1 • Single-level cell (SLC) technology • Organization – Page size x8: 2112 bytes (2048 + 64 bytes) – Page size x16: 1056 words (1024 + 32 words) – Block size: 64 pages (128K + 4K bytes) – Plane size: 2 planes x 1024 blocks per plane – Device size: 2Gb: 2048 blocks • Asynchronous I/O performance – tRC/tWC: 20ns (3.
3V), 25ns (1.
8V) • Array performance – Read page: 25µs 3 – Program page: 200µs (TYP: 1.
8V, 3.
3V)3 – Erase block: 700µs (TYP) • Command set: ONFI NAND Flash Protocol • Advanced command set – Program page cache mode4 – Read page cache mode 4 – One-time programmable (OTP) mode – Two-plane commands 4 – Interleaved die (LUN) operations – Read unique ID – Block lock (1.
8V only) – Internal data move • Operation status byte provides software method for detecting – Operation completion – Pass/fail condition – Write-protect status • Ready/Busy# (R/B#) signal provides a hardware method of detecting operation completion • WP# signal: Write protect entire device • First block (block address 00h) is valid when shipped from factory with ECC.
For minimum required ECC, see Error Management.
• Block 0 requires 1-bit ECC if PROGRAM/ERASE cycles are less than 1000 • RESET (FFh) required as first command after poweron • Alternate method of device initialization (Nand_Init) after power up (contact factory) • Internal data move operations supported within the plane from which data is read • Quality and reliability – Data retention: 10 years • Operating voltage range – VCC: 2.
7–3.
6V – VCC: 1.
7–1.
95V • Operating temperature: – Commercial: 0°C to +70°C – Industrial (IT): –40ºC to +85ºC • Package – 48-pin TSOP type 1, CPL2 – 63-ball VFBGA Notes: 1.
The ONFI 1.
0 specification is available at www.
onfi.
org.
2.
CPL =...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)