DatasheetsPDF.com

EKME6R3E**470ME11D

United Chemi
Part Number EKME6R3E**470ME11D
Manufacturer United Chemi
Description KME Series Aluminum Electrolytic Capacitors
Published Dec 12, 2013
Detailed Description Engineering Bulletin @Endurance with ripple current : 105C 1000 hours @Solvent-proof type except 350 to 400Vdc @Pb-free ...
Datasheet PDF File EKME6R3E**470ME11D PDF File

EKME6R3E**470ME11D
EKME6R3E**470ME11D

Overview
Engineering Bulletin @Endurance with ripple current : 105C 1000 hours @Solvent-proof type except 350 to 400Vdc @Pb-free design No.
511P / Oct.
2004 Standard, 105C Aluminum Electrolytic Capacitors ?SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Characteristics -55 to +105C(6.
3 to 100Vdc) -40 to +105C(160 to 400Vdc) 6.
3 to 400Vdc P20% (M) 6.
3 to 100Vdc I=0.
03CV or 4MA, whichever is greater.
I=0.
01CV or 3MA, whichever is greater.
(at 20C, 120Hz) 160 to 400Vdc Time After 1minute (at 20C after 1 minute) CV (at 20C after 2 minutes) CV[1000 I=0.
1CV+40 max.
CV>1000 I=0.
04CV+100 max.
After 5minutes I=0.
03CV+15 max.
I=0.
02CV+25 max.
(at 20C) Dissipation Factor (tane) Low Temperature Characteristics (Max.
Impedance Ratio) Endurance Shelf Life www.
DataSheet4U.
com Where, I : Max.
leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) Rated voltage (Vdc) 6.
3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 350 to 400V tanE (Max.
) 0.
22 0.
19 0.
16 0.
14 0.
12 0.
10 0.
09 0.
08 0.
20 0.
24 When nominal capacitance exceeds 1000MF, add 0.
02 to the value above for each 1000MF increase.
(at 20C, 120Hz) Rated voltage (Vdc) 6.
3V 10V 16V 25V 35V 50V 63V 100V 160 to 250V 350 to 400V Z(-25C)/Z(+20C) 6 3 2 2 2 2 2 2 3 4 Z(-40C)/Z(+20C) (at 120Hz) 6 4 3 3 3 3 3 4 6 8 The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated ripple current is applied for 1000 hours at 105C.
Capacitance change [P20% of the initial value D.
F.
(tanE) [200% of the initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1000 hours at 105C without voltage applied.
Rated voltage 6.
3 to 100Vdc 160 to 400Vdc Capacitance change [P20% of the initial value [P20% of the initial value D.
F.
(tanE) [200% of the initial specified value [200% of the initial specif...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)