DatasheetsPDF.com

STK544UC62K-E

ON Semiconductor
Part Number STK544UC62K-E
Manufacturer ON Semiconductor
Description Intelligent Power Module
Published Feb 4, 2014
Detailed Description STK544UC62K-E Intelligent Power Module (IPM) 600 V, 10 A Overview This Inverter IPM includes the output stage of a 3-ph...
Datasheet PDF File STK544UC62K-E PDF File

STK544UC62K-E
STK544UC62K-E

Overview
STK544UC62K-E Intelligent Power Module (IPM) 600 V, 10 A Overview This Inverter IPM includes the output stage of a 3-phase inverter, pre-drive circuits, bootstrap circuits, and protection circuits in one package.
www.
onsemi.
com Function  SIP (single in-line package) of the transfer full mold structure.
 The emitter line of the each lower phase outputs to an external terminal with the option of control using 3-phase current detection with external resistors.
 Direct input of CMOS level control signals without an insulating circuit is possible.
 Protective circuits including over current and pre-drive low voltage protection are built in.
 A single power supply drive is enabled through the use of bootstrap circuits for upper IGBT gate drives.
 Built-in dead-time for shoot-thru protection.
 Internal substrate temperature is measured with an internal pulled up thermistor.
Certification  UL1557 (File Number : E339285) Specifications Absolute Maximum Ratings at Tc = 25C Parameter Symbol Conditions Ratings Unit Supply voltage Collector-emitter voltage VCC VCE V+ to VRU(VRV,VRW), surge < 500 V V+ to U(V,W) or U(V,W) to VRU(VRV,VRW) *1 450 600 V V Output current Output peak current Pre-driver voltage Io Iop VD1,2,3,4 V+, VRU,VRV,VRW, U,V,W terminal current V+, VRU,VRV,VRW, U,V,W terminal current at Tc = 100C V+, VRU,VRV,VRW, U,V,W terminal current for a pulse width of 1 ms VB1 to U, VB2 to V, VB3 to W, VDD to VSS *2 ±10 ±6 ±20 20 A A A V Input signal voltage ITRIP terminal voltage VIN VITRIP HIN1, 2, 3, LIN1, 2, 3 terminals ITRIP terminal 0.
3 to 7 VSS+5 V V Maximum power dissipation Pd IGBT per 1 channel 22 W Junction temperature Tj IGBT,FRD 150 C Storage temperature Tstg 40 to +125 C Operating case temperature Tc IPM case temperature 40 to +100 C Tightening torque Case mounting screws *3 0.
9 Nm Withstand voltage Vis 50 Hz sine wave AC 1 minute *4 2000 VRMS Reference voltage is “VSS” terminal voltage unles...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)