DatasheetsPDF.com

6EL1SCM

Tyco
Part Number 6EL1SCM
Manufacturer Tyco
Description Power Entry Module
Published Mar 3, 2014
Detailed Description CORCOM Product Guide Power Entry Module with RFI Power Line Filter for General or Medical Applications L Series UL Rec...
Datasheet PDF File 6EL1SCM PDF File

6EL1SCM
6EL1SCM


Overview
CORCOM Product Guide Power Entry Module with RFI Power Line Filter for General or Medical Applications L Series UL Recognized CSA Certified VDE Approved EDL4C/EHL4C EDL1S/EHL1S L Series The L series power entry modules are compact units that combine a multi-function power entry module and high performance RFI filtering capabilities.
They are available with either a four-voltage selector or a DPST on/off switch.
Both variations can be specified with North American or European fusing capabilities and are available in either flange or snap-in mounting.
These filters are UL recognized, CSA certified, and VDE approved.
The L series modules offer a choice of filters for general or medical applications.
EDL Models The RFI filter is for general purpose applications where line-to-line and line-to-ground noise must be controlled.
The filter is designed to meet the very low leakage requirements of VDE portable equipment.
They are available in three current ratings.
EHL Models This medical filter provides susceptibility protection without the leakage current associated with line-to-ground capacitors.
Designed to allow equipment to meet UL544 for patient care and non-patient care equipment, the EHL filter has a maximum leakage current of 2 µA at 120 VAC 60 Hz.
See Appendix C for more information on medical applications and UL standards.
Note: When using the models with an IEC connector, remember that the leakage current of the companion line cord, GA400, is more significant than that of the filter which may disqualify this line cord from use in patient care applications.
Voltage Selection To change selected voltage: disconnect the power cord; open cover using a small blade screwdriver or similar tool; insert the tool into the voltage selection slot and remove wheel from unit; select desired voltage; replace wheel into unit and close cover, making sure the selected voltage appears in connector window.
Note: All models have North American or dual European fusing capability and...



Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)