DatasheetsPDF.com

FKS2F016801A00

WIMA
Part Number FKS2F016801A00
Manufacturer WIMA
Description Polyester (PET) Film and Foil Capacitors
Published Mar 8, 2014
Detailed Description WIMA FKS 2 Polyester (PET) Film and Foil Capacitors for Pulse Applications in PCM 5 mm Special Features ˜ Pulse duty...
Datasheet PDF File FKS2F016801A00 PDF File

FKS2F016801A00
FKS2F016801A00

Overview
WIMA FKS 2 Polyester (PET) Film and Foil Capacitors for Pulse Applications in PCM 5 mm Special Features ˜ Pulse duty construction ˜ According to RoHS 2011/65/EU D Electrical Data Capacitance range: 1000 pF to 0.
047 mF (E12-values on request) Rated voltages: 100 VDC, 250 VDC, 400 VDC Capacitance tolerances: ± 20%, ±10%, ±5% Operating temperature range: –55 + C to +100+ C (+125° C available subject to special enquiry) Test specifications: In accordance with IEC 60384-11 Climatic test category: 55/100/56 in accordance with IEC Insulation resistance at +20+ C:  3 x 10 4 M ¸ (mean value: 8 x 10 5 M¸) Measuring voltage: 100 V/1 min.
Test voltage: 2 Ur, 2 sec.
Maximum pulse rise time: 1000 V/msec for pulses equal to the rated voltage Dissipation factors at +20+ C: tan d   1 kHz   10 kHz 100 kHz at f C  0.
047 mF    7 x 10 -3  15 x 10-3  20 x 10-3 Typical Applications For general DC-applications e.
g.
˜ Coupling ˜ Decoupling Construction Dielectric: Polyethylene-terephthalate (PET) film Capacitor electrodes: Metal foil Internal construction: Voltage derating: A voltage derating factor of 1.
25 % per K must be applied from +85+ C for DC voltages and from +75+ C for AC voltages.
Reliability: Operational life  300 000 hours Failure rate  5 fit (0.
5 x U r and 40+ C) Plastic film Metal foil electrode Terminating wire Encapsulation: Solvent-resistant, flame-retardant plastic case with epoxy resin seal, UL 94 V-0 Terminations: Tinned wire.
Marking: Colour: Red.
Marking: Silver.
Epoxy resin seal: Yellow.
Mechanical Tests Pull test on pins: 10 N in direction of pins according to IEC 60068-2-21 Vibration: 6 hours at 10 .
.
.
 2000 Hz and 0.
75 mm displacement amplitude or 10 g in accordance with IEC 60068-2-6 Low air density: 1kPa = 10 mbar in accordance with IEC 60068-2-13 Bump test: 4000 bumps at 390 m/sec2 in accordance with IEC 60068-2-29 Packing Available taped and reeled.
Detailed taping information and graphs at the end of the catalogue.
For furt...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)