DatasheetsPDF.com

SA-AK630EE

Panasonic
Part Number SA-AK630EE
Manufacturer Panasonic
Description CD Stereo System Service Manual
Published May 16, 2014
Detailed Description ORDER NO. MD0503063C3 CD Stereo System SA-AK630EE Colour (S)... Silver Type Specifications n AMPLIFIER SECTION RMS ou...
Datasheet PDF File SA-AK630EE PDF File

SA-AK630EE
SA-AK630EE

Overview
ORDER NO.
MD0503063C3 CD Stereo System SA-AK630EE Colour (S).
.
.
Silver Type Specifications n AMPLIFIER SECTION RMS output power THD 10%, both channels driven 1 kHz (Low channel) 10 kHz (High channel) 80 Hz (Subwoofer channel) Total power output n FM/AM TUNER, TERMINALS SECTION Preset station Frequency Modulation (FM) Frequency range 87.
50 - 108.
00 MHz (50 kHz steps) Sensitivity S/N 26 dB Antenna terminal(s) Amplitude Modulation (AM) Frequency range Sensitivity S/N 20 dB (at 999 kHz) Audio performance (Amplifier) Input sensitivity/Input impedance Aux Phone jack Terminal Stereo, 3.
5 mm jack 250 mV,14.
7 kΩ 560 µV/m 522 - 1629 kHz (9 kHz steps) 1.
8 µV (IHF) 1.
5 µV 75 Ω (unbalanced) n DISC SECTION Discs played [8 cm or 12 cm] (1) CD-Audio (CD-DA) (2) CD-R/RW (CD-DA, MP3 formatted discs) (3) MP3 Bit rate MP3 Sampling frequency MP3 CD Decoding Digital filter 32 kHz, 44.
1 kHz, 48 kHz 44.
1 kHz 16 bit linear 8 fs 32 kbps - 320 kbps FM 15 stations AM 15 stations 160 W (8 Ω) 450 W 70 W per channel (5 Ω) 75 W per channel (5 Ω) n CASSETTE DECK SECTION Track system Heads Record/playback Erasure Motor Recording system Erasing system Tape speed Overall frequency response (+3 dB, -6 dB at DECK OUT) NORMAL S/N ratio Wow and flutter Fast forward and rewind time 35 Hz - 14 kHz 50 dB (A weighted) 0.
18 % (WRMS) Approx.
120 seconds with C-60 cassette tape Solid permalloy head Double gap ferrite head DC servo motor AC bias 100 kHz AC erase 100 kHz 4.
8 cm/s 4 track, 2 channel © 2005 Matsushita Electric Industrial Co.
Ltd.
.
All rights reserved.
Unauthorized copying and distribution is a violation of law.
http://www.
Datasheet4U.
com SA-AK630EE 3.
Press 5.
Press 6.
Press to close the tray.
wait until the tray is open.
and remove the CD.
to close the tray.
4.
Press “CD DIRECT PLAY (5)” and 7.
Press “n/STOP” to indicate Error Code.
· If several problem exist, error code will change each time when “n/STOP” is pressed.
(e.
g.
F15 → F26 → F16 .
.
.
.
etc).
11.
5.
T o clear all Error code 1.
Pres...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)