DatasheetsPDF.com

LPC11C12

NXP
Part Number LPC11C12
Manufacturer NXP
Description 32-bit ARM Cortex-M0 microcontroller
Published May 19, 2014
Detailed Description LPC11Cx2/Cx4 32-bit ARM Cortex-M0 microcontroller; 16/32 kB flash, 8 kB SRAM; C_CAN Rev. 2 — 3 December 2010 Product dat...
Datasheet PDF File LPC11C12 PDF File

LPC11C12
LPC11C12

Overview
LPC11Cx2/Cx4 32-bit ARM Cortex-M0 microcontroller; 16/32 kB flash, 8 kB SRAM; C_CAN Rev.
2 — 3 December 2010 Product data sheet 1.
General description The LPC11Cx2/Cx4 are an ARM Cortex-M0 based, low-cost 32-bit MCU family, designed for 8/16-bit microcontroller applications, offering performance, low power, simple instruction set and memory addressing together with reduced code size compared to existing 8/16-bit architectures.
The LPC11Cx2/Cx4 operate at CPU frequencies of up to 50 MHz.
The peripheral complement of the LPC11Cx2/Cx4 includes 16/32 kB of flash memory, 8 kB of data memory, one C_CAN controller, one Fast-mode Plus I2C-bus interface, one RS-485/EIA-485 UART, two SPI interfaces with SSP features, four general purpose counter/timers, a 10-bit ADC, and up to 40 general purpose I/O pins.
On-chip C_CAN drivers and flash In-System Programming tools via C_CAN are included.
In addition, the LPC11C22 and LPC11C24 parts include an on-chip, high-speed CAN transceiver.
2.
Features and benefits  System:  ARM Cortex-M0 processor, running at frequencies of up to 50 MHz.
 ARM Cortex-M0 built-in Nested Vectored Interrupt Controller (NVIC).
 Serial Wire Debug.
 System tick timer.
 Memory:  32 kB (LPC11Cx4) or 16 kB (LPC11Cx2) on-chip flash program memory.
 8 kB SRAM data memory.
 In-System Programming (ISP) and In-Application Programming (IAP) via on-chip bootloader software.
 Flash ISP commands can be issued via UART or C_CAN.
 Digital peripherals:  General Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors.
 40 GPIO pins on the LPC11C12/C14 parts; 36 GPIO pins on the LPC11C22/C24 parts.
 GPIO pins can be used as edge and level sensitive interrupt sources.
 High-current output driver (20 mA) on one pin.
 High-current sink drivers (20 mA) on two I2C-bus pins in Fast-mode Plus.
 Four general purpose counter/timers with a total of four capture inputs and 13 (LPC11C12/C14) or 12 (LPC11C22/C24) match outputs.
http://www.
Datasheet4U.
com ...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)