DatasheetsPDF.com

MT7200

Maxic Technology
Part Number MT7200
Manufacturer Maxic Technology
Description 350mA LED driver
Published Jul 22, 2014
Detailed Description MT7200 350mA LED driver with internal switch DESCRIPTION The MT7200 is a continuous mode inductive step-down converter, ...
Datasheet PDF File MT7200 PDF File

MT7200
MT7200

Overview
MT7200 350mA LED driver with internal switch DESCRIPTION The MT7200 is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage.
The device operates from an input supply between 7~40V and provides an externally adjustable output current of up to 350mA.
Depending upon supply voltage and external components, this can provide up to 8 watts of output power.
The MT7200 includes the output switch and a high-side output current sensing circuit, which uses an external resistor to set the nominal average output current.
Output current can be adjusted above, or below the set value, by applying an external control signal to the 'ADJ' pin.
The ADJ pin will accept either a DC voltage or a PWM waveform.
Depending upon the control frequency, this will provide either a continuous or a gated output current.
The PWM filter components are contained within the chip.
The PWM filter provides a soft-start feature by controlling the rise of input/output current.
The soft-start time can be increased using an external capacitor from the ADJ pin to ground.
Applying a voltage of 0.
2V or lower to the ADJ pin turns the output off and switches the device into a low current standby state.
The device is assembled in a SOT23-5/SOT89-5 pin package.
FEATURES             Pass 4KV ESD test Simple low parts count 350mA output current Single pin on/off and brightness control using DC voltage or PWM Internal PWM filter Soft-start High efficiency (up to 97%) Wide input voltage range: 7V to 40V Output shutdown Up to 1MHz switching frequency Inherent open-circuit LED protection Typical 4% output current accuracy APPLICATION      Low voltage halogen replacement LEDs Automotive lighting Low voltage industrial lighting LED back-up lighting Illuminated signs PIN CONFIGURATION APPLICATION CIRCUIT LX 1 5 VIN GND 2 SOT89-5 4 ISENSE (Top view) ADJ 3 MT7200 Rev.
1.
1 www.
maxic...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)