DatasheetsPDF.com

MT29F1G08ABADAH4

Micron Technology
Part Number MT29F1G08ABADAH4
Manufacturer Micron Technology
Description NAND Flash Memory
Published Oct 9, 2014
Detailed Description Micron Confidential and Proprietary Preliminary‡ 1Gb x8, x16: NAND Flash Memory Features NAND Flash Memory MT29F1G08A...
Datasheet PDF File MT29F1G08ABADAH4 PDF File

MT29F1G08ABADAH4
MT29F1G08ABADAH4

Overview
Micron Confidential and Proprietary Preliminary‡ 1Gb x8, x16: NAND Flash Memory Features NAND Flash Memory MT29F1G08ABADAWP, MT29F1G08ABBDAH4, MT29F1G08ABBDAHC, MT29F1G16ABBDAH4, MT29F1G16ABBDAHC, MT29F1G08ABADAH4 Features • Open NAND Flash Interface (ONFI) 1.
0-compliant1 • Single-level cell (SLC) technology • Organization – Page size x8: 2112 bytes (2048 + 64 bytes) – Page size x16: 1056 words (1024 + 32 words) – Block size: 64 pages (128K + 4K bytes) – Device size: 1Gb: 1024 blocks • Asynchronous I/O performance – tRC/tWC: 20ns (3.
3V), 25ns (1.
8V) • Array performance – Read page: 25µs3 – Program page: 200µs (TYP, 3.
3V and 1.
8V)3 – Erase block: 700µs (TYP) • Command set: ONFI NAND Flash Protocol • Advanced command set – Program page cache mode5 – Read page cache mode5 – One-time programmable (OTP) mode – Read unique ID – Internal data move • Operation status byte provides software method for detecting – Operation completion – Pass/fail condition – Write-protect status • Internal data move operations supported within the device from which data is read • Ready/busy# (R/B#) signal provides a hardware method for detecting operation completion • WP# signal: write protect entire device • First block (block address 00h) is valid when shipped from factory with ECC.
For minimum required ECC, see Error Management.
• Block 0 requires 1-bit ECC if PROGRAM/ERASE cycles are less than 1000 • RESET (FFh) required as first command after poweron • Alternate method of device initialization (Nand_Init) after power up4 (contact factory) • Quality and reliability – Data retention: 10 years • Operating Voltage Range – VCC: 2.
7–3.
6V – VCC: 1.
7–1.
95V • Operating temperature: – Commercial: 0°C to +70°C – Extended (ET): –40ºC to +85ºC • Package – 48-pin TSOP type 1, CPL2 – 63-ball VFBGA Notes: 1.
The ONFI 1.
0 specification is available at www.
onfi.
org.
2.
CPL = Center parting line.
3.
See Electrical Specifications for tR_ECC and tPROG_ECC specifications.
4.
Available only in the 1.
8V VFBG...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)