DatasheetsPDF.com

PCF1A470MCL6GS

Nichicon
Part Number PCF1A470MCL6GS
Manufacturer Nichicon
Description ALUMINUM ELECTROLYTIC CAPACITORS
Published Jan 14, 2015
Detailed Description CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CF Chip Type, Standard series Ultra-low ESR, High ripple curr...
Datasheet PDF File PCF1A470MCL6GS PDF File

PCF1A470MCL6GS
PCF1A470MCL6GS

Overview
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS CF Chip Type, Standard series Ultra-low ESR, High ripple current.
Load life of 2000 hours at 105°C.
SMD type : Lead free reflow soldering condition at 260°C peak correspondence.
Compliant to the RoHS directive (2002/95/EC).
CV High Voltage CG Higher Capacitance, CS Long Life CF Low ESR CJ Specifications Item Performance Characteristics Category Temperature Range – 55 to +105°C Rated Voltage Range 2.
5 to 25V Rated Capacitance Range 3.
3 to 1500µF Capacitance Tolerance ± 20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Leakage Current ( 2) Less than or equal to the specified value.
After 2 minutes' application of rated voltage at 20°C Temperature Characteristics (Max.
Impedance Ratio) Z+105°C / Z+20°C 1.
25 Z– 55°C / Z+20°C 1.
25 (100kHz) Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 105°C Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Damp Heat (Steady State) The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60°C, 90% RH.
Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Resistance to Soldering Heat Marking After soldering the capacitor under the soldering conditions prescribed here, the capacitor shall meet the specifications listed at right, provided that it's temperature p...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)