DatasheetsPDF.com

PLF0E152MDO6

Nichicon
Part Number PLF0E152MDO6
Manufacturer Nichicon
Description ALUMINUM ELECTROLYTIC CAPACITORS
Published Jan 16, 2015
Detailed Description CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LF Radial Lead Type, Standard series Ultra-low ESR, High ripp...
Datasheet PDF File PLF0E152MDO6 PDF File

PLF0E152MDO6
PLF0E152MDO6

Overview
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LF Radial Lead Type, Standard series Ultra-low ESR, High ripple current.
Load life of 2000 hours at 105°C.
Radial lead type : Lead free flow soldering condition correspondence.
Compliant to the RoHS directive (2002/95/EC).
LV High Voltage LG Higher Capacitance LS Long Life LF Low ESR LE Specifications Item Performance Characteristics Category Temperature Range – 55 to +105°C Rated Voltage Range 2.
5 to 25V Rated Capacitance Range 6.
8 to 1500µF Capacitance Tolerance ± 20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Leakage Current ( 2) Less than or equal to the specified value.
After 2 minutes' application of rated voltage at 20°C Temperature Characteristics (Max.
Impedance Ratio) Z+105°C / Z+20°C 1.
25 (100kHz) Z– 55°C / Z+20°C 1.
25 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 105°C.
Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Damp Heat (Steady State) The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60°C, 90% RH.
Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Resistance to Soldering Heat After soldering the capacitor under the soldering conditions prescribed here as preheat at 150 to 200°C for 60 to 180 seconds and peak temperature at 265°C for 10 seconds or less, t...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)