DatasheetsPDF.com

PLS1A271MDO1

Nichicon
Part Number PLS1A271MDO1
Manufacturer Nichicon
Description CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
Published Jan 19, 2015
Detailed Description CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LS Radial Lead Type, Long Life Assurance series Ultra-low ESR...
Datasheet PDF File PLS1A271MDO1 PDF File

PLS1A271MDO1
PLS1A271MDO1

Overview
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS LS Radial Lead Type, Long Life Assurance series Ultra-low ESR, High ripple current.
Load life of 5000 hours at 105°C.
Radial lead type : Lead free flow soldering condition correspondence.
Compliant to the RoHS directive (2002/95/EC).
LS Long Life LF Specifications Item Performance Characteristics Category Temperature Range – 55 to +105°C Rated Voltage Range 2.
5 to 16V Rated Capacitance Range 100 to 1500µF Capacitance Tolerance ± 20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Leakage Current ( 2) Less than or equal to the specified value.
After 2 minutes' application of rated voltage at 20°C Temperature Characteristics (Max.
Impedance Ratio) Z+105°C / Z+20°C 1.
25 (100kHz) Z– 55°C / Z+20°C 1.
25 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 5000 hours at 105°C.
Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Damp Heat (Steady State) The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60°C, 90% RH.
Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 20% of the initial capacitance value ( 3) 150% or less than the initial specified value 150% or less than the initial specified value Less than or equal to the initial specified value Resistance to Soldering Heat After soldering the capacitor under the soldering conditions prescribed here as preheat at 150 to 200°C for 60 to 180 seconds and peak temperature at 265°C for 10 seconds or less, the capacitor shall meet the specification...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)