DatasheetsPDF.com

FP6861C

Fiti
Part Number FP6861C
Manufacturer Fiti
Description Single-Channel Power Distribution Switch
Published Jan 21, 2015
Detailed Description FP6861C Single-Channel Power Distribution Switch Description The FP6861C is a cost-effective, low voltage, single N-Cha...
Datasheet PDF File FP6861C PDF File

FP6861C
FP6861C

Overview
FP6861C Single-Channel Power Distribution Switch Description The FP6861C is a cost-effective, low voltage, single N-Channel MOSFET high-side power switch, optimized for self-powered and bus-powered Universal Serial Bus (USB) applications.
The FP6861C is equipped with a charge pump circuitry to drive the internal MOSFET switch.
The switch's low RDS(ON) meets USB voltage drop requirement, and a flag output is available to indicate fault conditions to the local USB controller.
Additional features include soft-start to limit inrush current during plug-in, thermal shutdown to prevent catastrophic switch failure from high-current loads, and under-voltage lockout (UVLO) to ensure that the device remains off unless there is a valid input voltage present.
Besides, fault current is limited to specific current for FP6861C in single port in accordance with the USB power requirements.
FP6861C will prevent reverse current when it is disabled and VOUT is higher than VIN.
The FP6861C is available in MSOP-8, SOP-8 and SOT-23-5 packages with smallest components.
Pin Assignments MS Package (MSOP-8) GND 1 VIN 2 VIN 3 (EN) EN 4 8 VOUT 7 VOUT 6 VOUT* 5 OC SO Package (SOP-8) GND 1 VIN 2 VIN 3 (EN) EN 4 8 VOUT 7 VOUT 6 VOUT* 5 OC * The pin 6 should be considered as VOUT when circuit design and PCB layout, but it is NC pin actually.
FP6861C-1.
0-DEC-2015 Features  Compliant to USB Specifications  Built-In Low RDS(ON) N-Channel MOSFET  Output can be Forced Higher than Input (Off-State)  Low Supply Current: 65μA Typical at Switch On State 0.
1μA Typical at Switch Off State  Wide Input Voltage Ranges: 2.
7V to 5.
5V  Open-Drain Fault Flag Output  Hot Plug-In Application (Soft-Start)  2.
2V Typical Under-Voltage Lockout (UVLO)  Current Limit Protection  Thermal Shutdown Protection  Reverse Current Flow Blocking (No Body Diode)  Logic Level Enable Pin  MSOP-8, SOP-8 and SOT-23-5 Packages  RoHS Compliant  UL NO.
E322418 (Approved model: FP6861 series)...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)