DatasheetsPDF.com

STRW6753

Sanken
Part Number STRW6753
Manufacturer Sanken
Description Quasi-Resonant Topology Primary Switching Regulator
Published Feb 6, 2015
Detailed Description STR-W6753 Quasi-Resonant Topology Primary Switching Regulators Features and Benefits ▪ Quasi-resonant topology IC  Low...
Datasheet PDF File STRW6753 PDF File

STRW6753
STRW6753

Overview
STR-W6753 Quasi-Resonant Topology Primary Switching Regulators Features and Benefits ▪ Quasi-resonant topology IC  Low EMI noise and soft switching ▪ Bottom-skip mode  Improved system efficiency over the entire output load by avoiding increase of switching frequency ▪ Auto-Standby mode  Lowers input power at very light output load condition ▪ Avalanche-guaranteed MOSFET  Improves system-level reliability and does not require VDSS derating ▪ 650 V / 1.
70 Ω ▪ Various protections  Improved system-level reliability Continued on the next page… Package: 6-pin TO-220 Not to scale Description The STR-W6753 is a quasi-resonant topology IC designed for SMPS applications.
It shows lower EMI noise characteristics than conventional PWM solutions, especially at greater than 2 MHz.
It also provides a soft-switching mode to turn on the internal MOSFET at close to zero voltage (VDS bottom point) by use of the resonant characteristic of primary inductance and a resonant capacitor.
The package is a fully molded TO-220, which contains the controller chip (MIC) and MOSFET, enabling output power up to 58 W with universal input or 120 W with a 230 VAC input.
The bottom-skip mode skips the first bottom of VDS and turns on the MOSFET at the second bottom point, to minimize an increase of operating frequency at light output load, improving system-level efficiency over the entire load range.
There are two standby modes available to reduce the input power under very light load conditions.
The first is Auto-Standby mode, which is internally triggered by periodic sensing, and the other is a manual standby mode, which is executed by clamping the secondary output.
In general applications, the manual standby mode reduces the input power further compared to Auto-Standby mode.
The soft-start mode minimizes surge voltage and reduces power stress to the MOSFET and to the secondary rectifying Continued on the next page… Typical Application Diagram P S1 +B ErrAmp A D 1 4 STR-W6753 VCC Cont...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)