DatasheetsPDF.com

WSH277

Winson
Part Number WSH277
Manufacturer Winson
Description Hall Effect Sensor IC
Published Apr 18, 2015
Detailed Description WSH277 Hall Effect Sensor IC with Thermal Lock Protection and Auto Restart Function Features: z Operate from 2.8V to 24V...
Datasheet PDF File WSH277 PDF File

WSH277
WSH277

Overview
WSH277 Hall Effect Sensor IC with Thermal Lock Protection and Auto Restart Function Features: z Operate from 2.
8V to 24V supply voltage.
z On-chip Hall sensor.
z Internal bandgap regulator allows temperature compensated operations and a wide operating voltage range.
z High output sinking capability up to 500mA for driving large load.
z Lower current change rate reduces the peak output voltages during switching.
z Available in rugged low profile SIP-4L packages.
z Built-in protection diode for reverse power supply fault.
z Built-in thermal lock protection and auto-restart function.
General Description: W277 is designed to integrate Hall sensor with complementary output drivers and frequency generator together on the same chip, it is suitable for speed measurement, revolution counting, positioning, and DC brushless motors.
It includes a temperature compensated voltage regulator, a differential amplifier, a Hysteresis controller, two open-collector output drivers capable of sinking 500mA current load.
An on-chip protection diode is implemented to prevent reverse power fault.
And built-in thermal lock protection and auto-restart function is suitable for super high speed fan.
It can replace the function of lock protection and auto restart function.
The power will be shutdown automatically at 120°C to prevent the coils be damaged and atuo-restart after cooling down.
The temperature-dependent bias increases the supply voltage of the hall plates and adjusts the switching points to the decreasing induction of magnets at higher temperatures.
Subsequently, the open collector output switches to the appropriate state.
W277 are rated for operation over temperature range from –20˚ C to 85˚C and voltage ranges from 2.
8V to 24V.
Winson reserves the right to make changes to improve reliability or manufacturability.
©Winson, 2006/8/3 1 WSH277 Pin Descriptions: SIP-4L Name P/I/O Pin# Vcc P 1 OUT1 O 2 OUT2 O 3 Vss P 4 Description Positive Power Supply Output Pin #1 Output P...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)