DatasheetsPDF.com

TX8202

Australian Monitor
Part Number TX8202
Manufacturer Australian Monitor
Description 8 Channel Stereo Mixer Operating Manual
Published May 17, 2015
Detailed Description TX8202 8 Channel Stereo Mixer with Direct Outputs Operating Manual TX8202, 8 Channel Stereo Mixer Product Description Th...
Datasheet PDF File TX8202 PDF File

TX8202
TX8202

Overview
TX8202 8 Channel Stereo Mixer with Direct Outputs Operating Manual TX8202, 8 Channel Stereo Mixer Product Description The TX8202 is a single rack height, 8 channel stereo mixer with direct outputs suitable for desk or 19” rack mounting.
The TX8202 has 4 balanced mic or line inputs and 4 stereo auxiliary inputs.
Each input channel has individual bass, treble and pan controls.
The first 4 channels also feature a line level direct output which can be used to feed additional amplifiers, mixers or recording devices.
An internal dip switch allows the first 4 inputs to be routed to either the direct output, the master outputs or both.
The TX8202 also features in-built VOX muting and an optional 4 tone generator with Alert, Evacuate, Pre-Announce, Bell tones and optional remote VCA for the Master Volume.
Front Panel Features Input Level Controls Mic/Line Gain: The first 4 inputs are labeled Mic/Line 1 to Mic/Line 4 and should be adjusted to provide the required mix level for each individual channel.
Start with the controls set to Level 0 and turn the controls clockwise until the desired mix level for each channel is reached.
Each of the 4 inputs is equipped with an mic/line dip switch which is located inside the unit (see Internal Adjustments).
Please ensure that this switch is in the correct position for the type of input (mic or line) that you are connecting to each channel.
The input sensitivity when in the mic level position is 1mV (for 1 Volt output).
The input sensitivity when in the line level position is 330mV (for a 1 Volt output) Stereo Line Gain: The 4 auxiliary input channels are labeled Stereo Line 5 to Stereo Line 8.
These controls should be adjusted to provide the required mix level for each individual auxiliary channel.
Start with the controls set to Level 0 and turn the controls clockwise until the desired mix level for each channel is reached.
The sensitivity of auxiliary inputs 5 to 8 is 180 mV (for a 1 volt output).
Master Left and Right Output The mast...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)