DatasheetsPDF.com

AG303

WJ Communications
Part Number AG303
Manufacturer WJ Communications
Description InGaP HBT Gain Block
Published Jun 13, 2015
Detailed Description AG303 InGaP HBT Gain Block The Communications Edge TM Preliminary Product Information Product Features Product Descri...
Datasheet PDF File AG303 PDF File

AG303
AG303

Overview
AG303 InGaP HBT Gain Block The Communications Edge TM Preliminary Product Information Product Features Product Description Functional Diagram • DC - 5000MHz • +13 dBm P1dB at 900MHz • +27 dBm OIP3 at 900MHz • 20.
5 dB Gain at 900MHz • Single Voltage Supply • SOT-363 or SOT-86 SMT Package • Internally matched to 50 Ω The AG303 is a general-purpose buffer amplifier that offers high dynamic range in a low-cost surface-mount package.
At 900 MHz, the AG303 typically provides 20.
5 dB of gain, +27 dBm Output IP3, and +13 dBm P1dB.
The device combines dependable performance with consistent quality to maintain MTBF values exceeding 100 years at mounting temperatures of +85°C and is housed in a SOT-363 & SOT-86 industry standard SMT packages.
The AG303 consists of Darlington pair amplifiers using the high reliability InGaP/GaAs HBT technology process technology and only requires DC-blocking capacitors, a bias resistor, and an inductive RF choke for operation.
The broadband MMIC amplifier can be directly applied to various current and next generation wireless technologies such as GPRS, GSM, CDMA, W-CDMA, and UMTS.
In addition, the AG303 will work for other various applications within the DC to 5 GHz frequency range such as CATV and fixed wireless.
RF in GND AG33 RF OUT GND AG303-86 GND RF OUT GND GND RF IN AG303-63 GND Specifications Parameters1 Units Min Typ Max Frequency Range MHz DC-5000 S21 - Gain dB 20.
5 S11 - Input Return Loss dB -15 S22 - Output Return Loss dB -15 Output P1dB dBm +13 Output IP3 dBm +27 Noise Figure dB 3.
6 Device Voltage V 4.
0 Device Current mA 35 Test conditions unless otherwise noted 1.
T = 25ºC, Supply Voltage = +5 V, Rbias = 30 Ω, Frequency = 900MHz, 50 Ω System.
2.
3OIP measured with two tones at an output power of -5 dBm/tone separated by 10MHz.
The suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
Absolute Maximum Ratings Parameters Rating Operating Case Temperature ...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)