DatasheetsPDF.com

BL24C02

BELLING
Part Number BL24C02
Manufacturer BELLING
Description Two-wire Serial EEPROM
Published Jul 20, 2015
Detailed Description Shanghai Belling Corp., Ltd BL24C02/04/08/16 BL24C02/BL24C04/BL24C08/BL24C16 2K bits (256 X 8) / 4K bits (512 X 8) / 8...
Datasheet PDF File BL24C02 PDF File

BL24C02
BL24C02

Overview
Shanghai Belling Corp.
, Ltd BL24C02/04/08/16 BL24C02/BL24C04/BL24C08/BL24C16 2K bits (256 X 8) / 4K bits (512 X 8) / 8K bits (1024 X 8) / 16K bits (2048 X 8) Two-wire Serial EEPROM  Features  Two-wire Serial Interface  VCC = 1.
7V to 5.
5V  Bi-directional Data Transfer Protocol  Internally Organized BL24C02, 256 X 8 (2K bits) BL24C04, 512 X 8 (4K bits) BL24C08, 1024 X 8 (8K bits) BL24C16, 2048 X 8 (16K bits)  1 MHz (5V), 400 kHz (1.
8V, 2.
5V, 2.
7V) Compatibility  8-byte Page (2K), 16-byte Page (4K, 8K, 16K) Write Modes  Self-timed Write Cycle (5 ms max)  1 Million Write Cycles guaranteed  Data Retention > 100 Years  Operating Temperature: -40℃ to +85℃  8-lead PDIP, 8-lead SOP , 5-lead TSOT 23-5 and 8-lead TSSOP Packages 5-lead TSOT23-5  Description BL24C02/BL24C04/BL24C08/BL24C16 provides 2048/4096/8192/16384 bits of serial electrically erasable and programmable read-only memory (EEPROM) organized as 256/512/1024/2048 words of 8 bits each.
The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operations are essential.
The BL24C02/BL24C04/BL24C08/BL24C16 is available in space-saving 8-lead PDIP, 8-lead SOP, 8-lead TSSOP and 5-lead TSOT23-5 packages and is accessed via a two-wire serial interface.
1 Shanghai Belling Corp.
, Ltd  Pin Descriptions BL24C02/04/08/16 Block Diagram 2 Shanghai Belling Corp.
, Ltd BL24C02/04/08/16 DEVICE/PAGE ADDRESSES (A2, A1 and A0): The A2, A1 and A0 pins are device address inputs that are hard wired for the BL24C02.
Eight 2K devices may be addressed on a single bus system (device addressing is discussed in detail under the Device Addressing section).
The BL24C04 uses the A2 and A1 inputs for hard wire addressing and a total of four 4K devices may be addressed on a single bus system.
The A0 pin is a no connect and can be connected to ground.
The BL24C08 only uses the A2 input for hardwire addressing and a total of two 8K devices may be addressed on a single bus sy...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)