DatasheetsPDF.com

AH3763Q

Diodes Incorporated
Part Number AH3763Q
Manufacturer Diodes Incorporated
Description AUTOMOTIVE HALL-EFFECT LATCH
Published Jul 22, 2015
Detailed Description PRELIMINARY - CONFIDENTIAL Description The AH3763Q is an AEC-Q100 qualified high-voltage, high-sensitivity Hall-Effect ...
Datasheet PDF File AH3763Q PDF File

AH3763Q
AH3763Q

Overview
PRELIMINARY - CONFIDENTIAL Description The AH3763Q is an AEC-Q100 qualified high-voltage, high-sensitivity Hall-Effect latch IC designed for brushless DC-motor commutation speed measurement, angular or linear encoders and position sensors in automotive applications.
To support a wide range of demanding applications, the design is optimized to operate over the supply range of 3.
0V to 28V.
With chopper stabilized architecture and an internal bandgap regulator to provide temperature compensated supply for internal circuits, the AH3763Q provides a reliable solution over the whole operating range.
For robustness and protection, the device has a reverse blocking diode with a Zener clamp on the supply.
The output has an overcurrent limit and a Zener clamp.
AH3763Q HIGH-VOLTAGE, HIGH-SENQSITIVITY AUTOMOTIVE HALL-EFFECT LATCH Pin Assignments (Top View) GND 2 3 OUTPUT 1 VDD SC59 and SOT23 The single, open-drain output can be switched on with South pole of sufficient strength and switched off with North pole of sufficient strength.
When the magnetic flux density (B) perpendicular to the package is larger than the operate point (Bop) the output is switched on (pulled low).
The output is held latched until magnetic flux density reverses and becomes lower than the release point (Brp).
The magnetic operating and release polarity is opposite for SOT23 and SC59 packages.
SOT23 and SIP-3 packages will require south pole to the part marking side to operate while SC59 will require south pole to the non part-marking side.
(Top View) SIP-3 3.
OUTPUT 2.
GND 1.
VDD Features • Bipolar Latch Operation (South Pole: On, North Pole: off) • High Sensitivity: Bop and Brp of +30G and -30G Typical • Single Open-Drain Output with Overcurrent Limit • 3.
0V to 28V Operating Voltage Range • Chopper Stabilized Design Provides  Superior Temperature Stability  Minimal Switch Point Drift  Enhanced Immunity to Stress • Good RF Noise Immunity • Reverse Blocking Diode • Zener Clamp on Supply and O...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)