DatasheetsPDF.com

MCR05

OTTRON
Part Number MCR05
Manufacturer OTTRON
Description Ethernet Based Contactless Card R/W Terminals
Published Aug 4, 2015
Detailed Description MCR02/05 Ethernet Based Contactless Card R/W Terminals Features • ISO14443 & Mifare Support • Ethernet 10BaseT Full D...
Datasheet PDF File MCR05 PDF File

MCR05
MCR05

Overview
MCR02/05 Ethernet Based Contactless Card R/W Terminals Features • ISO14443 & Mifare Support • Ethernet 10BaseT Full Duplex • Integrated TCP/IP Stack • TCP/IP Client-Server Connection Support • Integrated DNS Client • DHCP or Static Operation • UDP, TCP,ARP,ICMP(ping) Support • TCP/IP Server or Client Mode Operation • Easy Configuration over a Network ( LAN ) • RS232/ RS485 / USB Communication Options • -40 °C … +70 °C Industrial Operation • Globally Unique MAC • 2xRelay Output • 4xDigital Input for peripherals i.
e gates, turnstiles etc.
• Offline Operation Mode* • TFTP & FTP Support* • RTC with Battery Backup & NTP Server Support* • Remote Firmware Update over Network* *Selected Models Only Electrical Specifications Parameter Operation Voltage Power Consumption Operation Temp.
CPU External Memory CPU RAM Led Indicators Global Unique MAC ID Ethernet IO / Relays RS485 RS232 / USB RTC with Backup Battery Min.
7.
5 V 1.
6 W -20 Co Nominal Max.
12 V 2.
4 W ~ ARM Cortex CPU 128 Byte EEPROM & 1Mbyte Flash Memory* 8 KB SRAM 2xLED Onboard Yes 10BaseT, IP, PING, DHCP, UDP, TCP, ARP 2xRelay; 4xInput Yes* (RS232) Yes Yes 35 V 3W +85 Co 1 Mechanical View & Dimensions 2 Operating Modes & Setup Server & Client Protocols MCR02 Ethernet Terminals can be used in either Client or Server.
In client mode the terminal connect to a remote server that it listening a TCP/UDP port.
Server may accept multiple connections.
MCR02 Terminals can be used as Server.
The terminal listens own port and can accept a connection request from outside.
In this case terminal’s IP number is to be static.
It depends on the application whether the terminal is in Client or Server mode.
TCP/IP Client Mode Operation When the terminal is set to operate in client mode it tries to connect a remote server ip & port set in configuration.
TCP/IP Server Mode Operation When the terminal is set to operate in server mode it listens own TCP port to accept outcoming request from other clients.
Terminal ...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)