DatasheetsPDF.com

ASM2P20807A

Alliance Semiconductor
Part Number ASM2P20807A
Manufacturer Alliance Semiconductor
Description 2.5V CMOS 1-TO-10 CLOCK DRIVER
Published Feb 6, 2016
Detailed Description June 2005 rev 0.2 ASM2P20807A 2.5V CMOS 1-TO-10 CLOCK DRIVER Features • High frequency > 150MHz • Guaranteed low skew ...
Datasheet PDF File ASM2P20807A PDF File

ASM2P20807A
ASM2P20807A

Overview
June 2005 rev 0.
2 ASM2P20807A 2.
5V CMOS 1-TO-10 CLOCK DRIVER Features • High frequency > 150MHz • Guaranteed low skew < 150pS (max.
) between any two outputs • Very low duty cycle distortion < 300pS • High speed: propagation delay < 3nS • Very low CMOS power levels • TTL compatible inputs and outputs • 1:10 fanout • Maximum output rise and fall time < 1.
25nS (max.
) • Low input capacitance: 3pF (typ) • 2.
5V Supply Voltage • Available in SSOP and QSOP Packages Block Diagram Product Description The ASM2P20807A is a 2.
5V compatible, high speed, low noise, 1:10 fanout, non-inverting clock buffer.
The large fanout from a single input reduces loading on the preceding driver and provides an efficient clock distribution network.
Providing output to output skew as low as 150pS, the ASM20807A is an ideal clock distribution device for synchronous systems.
Multiple power and grounds reduce noise.
Typical applications are clock and signal distribution.
O1 O2 O3 O4 O5 IN O6 O7 O8 O9 O10 Alliance Semiconductor 2575, Augustine Drive • Santa Clara, CA • Tel: 408.
855.
4900 • Fax: 408.
855.
4999 • www.
alsc.
com Notice: The information in this document is subject to change without notice.
June 2005 ASM2P20807A rev 0.
2 Pin Configuration Pin Description Pin # 1 3,5,7,9,11,12,14,16,18,19 2,6,10,13,17 4,8,15,20 IN GND O1 VCC O2 GND O3 VCC O4 GND 1 20 2 A 19 3 S 18 4 M 17 2 5 P 16 2 6 0 15 7 8 14 0 8 7 13 9 A 12 10 11 SSOP/ QSOP PACKAGE TOP VIEW VCC O10 O9 GND O8 VCC O7 GND 06 O5 Pin Names IN O1-O10 GND VCC Description Clock Input Clock Outputs Ground Power supply Capacitance (TA = +25°C, f = 1.
0MHz) Symbol CIN Parameter1 Input Capacitance Conditions VIN = 0V NOTE:1.
This parameter is measured at characterization but not tested.
Typ Max Unit 3 4 pF Absolute Maximum Ratings1 Symbol VTERM2 VTERM3 VTERM4 Description Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Terminal Voltage with Respect to GND Max -0.
5 to +4.
6 -0.
5 to +5.
5 -0.
5 to VCC+0.
5 Un...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)