DatasheetsPDF.com

EKXJ201E

Chemi
Part Number EKXJ201E
Manufacturer Chemi
Description MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS
Published Feb 13, 2016
Detailed Description MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 160 to 500Vdc, long life, 105℃ KXJSeries ・Downsized and Longer life from cu...
Datasheet PDF File EKXJ201E PDF File

EKXJ201E
EKXJ201E

Overview
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS 160 to 500Vdc, long life, 105℃ KXJSeries ・Downsized and Longer life from current KXG series ・Endurance with ripple current : 8,000 to 12,000 hours at 105℃ ・Rated voltage range : 160 to 500V, Capacitance range : 6.
8 to 680µF ・For electronic ballast circuits and other long life applications ・Non solvent resistant type ・RoHS Compliant KXJ Downsized KXG P183 ◆SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tan ) Low Temperature Characteristics (Max.
Impedance Ratio) Endurance Shelf Life Characteristics –40 to +105℃ (160 to 450Vdc) -25 to +105℃ (500Vdc) 160 to 500Vdc ±20% (M) (at 20℃, 120Hz) After 1 minute After 5 minutes CV≦1000 I=0.
1CV+40 I=0.
03CV+15 CV>1000 I=0.
04CV+100 I=0.
02CV+25 Where, I : Max.
leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) (at 20℃) Rated voltage (Vdc) 160 to 250V 350 to 500V tanδ (Max.
) 0.
20 0.
24 (at 20℃, 120Hz) Rated voltage (Vdc) 160 to 250V 350, 400V 420 to 500V Z(－25℃)/Z(+20℃) 3 5 6 Z(－40℃)/Z(+20℃) 6 6－ (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied(the peak voltage shall not exceed the rated voltage) for the specified time at 105℃.
Rated voltage (Vdc) 160 to 450V 500V Time 16L to 20L：10,000hours, 25L to 50L：12,000hours φ10：8,000hours, φ12.
5 to φ18：10.
000hours Capacitance change ≦±20% of the initial value D.
F.
(tanδ) ≦200％ of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied.
Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.
1 of JIS C 5101-4.
Capacitance change ≦±20% of the initial value D.
F.
(tanδ) ≦20...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)