DatasheetsPDF.com

PLX1D121MCL1

Nichicon
Part Number PLX1D121MCL1
Manufacturer Nichicon
Description CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
Published Feb 26, 2016
Detailed Description CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PLX Radial Lead Type, Long Life Assurance High reliability, ...
Datasheet PDF File PLX1D121MCL1 PDF File

PLX1D121MCL1
PLX1D121MCL1

Overview
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS PLX Radial Lead Type, Long Life Assurance High reliability, High voltage (to 50V).
Low ESR, High ripple current.
Long life of 3000 hours at 125°C.
Radial lead type: Lead free flow soldering condition correspondence.
Adapted to the RoHS directive (2011/65/EU).
PLX Higher Temperature Specifications PLV Item Performance Characteristics Category Temperature Range – 55 to +125°C Rated Voltage Range 16 to 50V Rated Capacitance Range 22 to 390µF Capacitance Tolerance ± 20% at 120Hz, 20°C Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C ESR ( 1) Less than or equal to the specified value at 100kHz, 20°C Leakage Current ( 2) Less than or equal to the specified value.
After 2 minutes' application of rated voltage at 20°C Temperature Characteristics (Max.
Impedance Ratio) Z+125°C / Z+20°C 1.
25 (100kHz) Z– 55°C / Z+20°C 1.
25 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 3000 hours at 125°C.
Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 20% of initial value ( 3) 150% or less of the initial specified value 150% or less of the initial specified value Less than or equal to the initial specified value Damp Heat (Steady State) The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 60°C, 90% RH.
Capacitance change tan δ ESR ( 1) Leakage current ( 2) Within ± 20% of initial value ( 3) 150% or less of the initial specified value 150% or less of the initial specified value Less than or equal to the initial specified value Resistance to Soldering Heat After soldering the capacitor under the soldering conditions prescribed here as preheat at 150 to 200°C for 60 to 180 seconds and peak temperature at 265°C for 10 seconds or less, the capacitor shall meet the specifications li...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)