DatasheetsPDF.com

WSH131

Winson Semiconductor
Part Number WSH131
Manufacturer Winson Semiconductor
Description Omnipolar Hall Effect Switch IC
Published Mar 28, 2016
Detailed Description WSH131 Omnipolar Hall Effect Switch IC Features: z Operates from 2.4V to 26V supply voltage z Operation with North or S...
Datasheet PDF File WSH131 PDF File

WSH131
WSH131


Overview
WSH131 Omnipolar Hall Effect Switch IC Features: z Operates from 2.
4V to 26V supply voltage z Operation with North or South Pole z On-chip Hall Sensor and driver z On-chip temperature compensation circuitry minimizes shifts in On/Off points temperature and supply voltage z On-chip voltage regulator to stabilize On/Off switch point z Wide range operating temperature –20 ~ 85℃ z Easily Manufacturability with magnet pole independence South or North magnetic field: Output Low No magnetic field : Output High.
Functional Description: WSH131 is designed to integrate pole independent Hall sensor with output driver together on the same chip.
Either North or South magnetic field with sufficient strength will turn the output on (low).
In the absence of a magnetic field, output is off (high).
The polarity independence allow WSH131 to easily replace reed switches for superior reliability and case of manufacturing.
To improve stability, it includes a temperature compensated voltage regulator, a differential amplifier, a Hysteresis controller and a open-collector output driver capable of sinking up to 20mA current load.
The temperature-dependent bias increases the supply voltage of the hall plates and adjusts the switching points to the decreasing induction of magnets at higher temperatures.
Subsequently, the output can keep switching on/off on more precise switch point regardless to the ambient temperature.
WSH131 are rated for operation over temperature range from –20˚ C to 85 ˚C and voltage ranges from 2.
4V to 26V.
Pin Descriptions: Name P/I/O Vdd P Gnd P Vout O Pin# 1 2 3 Description Positive Power Supply Ground Output Pin Winson reserves the right to make changes to improve reliability or manufacturability.
©Winson, 2013/5/23(Rev.
B) 1 WSH131 Absolute Maximum Rating (at Ta=25˚ C) Supply Voltage Vcc -------------------------- Output breakdown Voltage Magnetic flux density Vout(breakdown) --------------B -------------------------- Output ON Current (continu...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)