DatasheetsPDF.com

V23086-C1001-A403

Tyco
Part Number V23086-C1001-A403
Manufacturer Tyco
Description PC Board Relay
Published Apr 27, 2016
Detailed Description V23086 series 20 Amp Micro K (Single & Dual) PC Board Relay for Automotive Applications Features • 30A, 16VDC switching...
Datasheet PDF File V23086-C1001-A403 PDF File

V23086-C1001-A403
V23086-C1001-A403

Overview
V23086 series 20 Amp Micro K (Single & Dual) PC Board Relay for Automotive Applications Features • 30A, 16VDC switching rating.
• 40A inrush at 16VDC.
• 20A continuous contact rating @ 85°C.
• Immersion cleanable plastic case with knock-off nib for ventilation.
• 60% less volume than other comparable power relays.
• 1 Form A and 1 Form C arrangements in single and dual relay packages.
• Choice of AgNi 0.
15 or AgSnO contacts.
Operate Data Must Operate and Must Release Voltage: See Coil Data table.
Initial Operate Time: 3 milliseconds, typical, with rated coil voltage applied.
Initial Release Time: 1.
5 milliseconds, typical, with zero volts applied (for unsuppressed relays after having been energized at rated coil voltage.
) Conditions All parametric, environmental and life tests are performed according to EIA Standard RS-407-A at standard test conditions (23°C Ambient, 20-50% RH, 29.
5 ± 1.
0" Hg.
) unless otherwise noted.
Contact Data Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT) in single relay and dual relay configurations.
Material: AgNi 0.
15 - Recommended for inductive loads.
AgSnO - Recommended for high inrush, lamp and capacitive loads and applications prone to contact material transfer.
Max.
Switching Rate: 20 operations per second with no contact load.
6 operations per minute for rated life at rated load.
Max.
Load Current (@ 14VDC Load Voltage): Load Form A (NO) Form C NO NC Max.
Continuous Current Max.
Break Current Max.
Make Current AgSnO AgNi 0.
15 30A 30A 100A 40A 30A 30A 100A 40A 25A 25A 15A 10A Max.
Switching Power: 35-320 watts DC (voltage dependent).
Min.
Recommended Current: 0.
5 amp @ 12VDC.
Initial Voltage Drop: 200 millivolts, maximum, for normally open contacts @ 10 amp contact load.
250 millivolts, maximum, for normally closed contacts @ 5 amp contact load.
Expected Life: 10 million operations, mechanical; 100,000 operations at 20 amps, 14VDC, resistive load on normally open contact.
Initial Dielectric Strength Between Contacts a...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)