Balanced Mixer. ADL5363 Datasheet

ADL5363 Mixer. Datasheet pdf. Equivalent

ADL5363 Datasheet
Recommendation ADL5363 Datasheet
Part ADL5363
Description 2300 MHz to 2900 MHz Balanced Mixer
Feature ADL5363; Data Sheet 2300 MHz to 2900 MHz Balanced Mixer, LO Buffer and RF Balun ADL5363 FEATURES RF frequen.
Manufacture Analog Devices
Datasheet
Download ADL5363 Datasheet




Analog Devices ADL5363
Data Sheet
2300 MHz to 2900 MHz Balanced Mixer,
LO Buffer and RF Balun
ADL5363
FEATURES
RF frequency range of 2300 MHz to 2900 MHz
IF frequency range of dc to 450 MHz
Power conversion loss: 7.7 dB
SSB noise figure of 7.6 dB
Input IP3 of 31 dBm
Typical LO drive of 0 dBm
Single-ended, 50 Ω RF and LO input ports
High isolation SPDT LO input switch
Single-supply operation: 3.3 V to 5 V
Exposed pad, 5 mm × 5 mm 20-lead LFCSP
1500 V HBM/1250 V FICDM ESD performance
APPLICATIONS
Cellular base station receivers
Transmit observation receivers
Radio link downconverters
GENERAL DESCRIPTION
The ADL5363 uses a highly linear, doubly balanced passive
mixer core along with integrated RF and local oscillator (LO)
balancing circuitry to allow for single-ended operation. The
ADL5363 incorporates an RF balun to provide optimal
performance over a 2300 MHz to 2900 MHz input frequency
range. The balanced passive mixer arrangement provides good
LO-to-RF leakage, typically better than −30 dBm, and excellent
intermodulation performance. The balanced mixer core also
provides extremely high input linearity, allowing the device to
be used in demanding cellular applications where in-band
blocking signals might otherwise result in the degradation of
dynamic performance.
FUNCTIONAL BLOCK DIAGRAM
VCMI
20
IFOP
19
IFON
18
PWDN
17
COMM
16
VPMX 1
ADL5363
15 LOI2
RFIN 2
14 VPSW
RFCT 3
COMM 4
BIAS
GENERATOR
13 VGS1
12 VGS0
COMM 5
11 LOI1
6
VLO3
7
LGM3
8
VLO2
9
LOSW
10
NC
NC = NO CONNECT
Figure 1.
The ADL5363 provides two switched LO paths that can be used
in TDD applications where it is desirable to rapidly switch between
two local oscillators. LO current can be externally set using a
resistor to minimize dc current commensurate with the desired
level of performance. For low voltage applications, the ADL5363
is capable of operation at voltages down to 3.3 V with
substantially reduced current. For low voltage operation, an
additional logic pin is provided to power down (<200 µA) the
circuit when desired.
The ADL5363 is fabricated using a BiCMOS high performance
IC process. The device is available in a 5 mm × 5 mm, 20-lead
LFCSP and operates over a −40°C to +85°C temperature range.
An evaluation board is also available.
Table 1. Passive Mixers
Single
RF Frequency (MHz) Mixer
500 to 1700
ADL5367
1200 to 2500
ADL5365
2300 to 2900
ADL5363
Single Mixer
and IF Amp
ADL5357
ADL5355
ADL5353
Dual Mixer
and IF Amp
ADL5358
ADL5356
ADL5354
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibilityisassumedbyAnalogDevices for itsuse,nor foranyinfringementsofpatentsor other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2011–2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com



Analog Devices ADL5363
ADL5363* PRODUCT PAGE QUICK LINKS
Last Content Update: 02/23/2017
COMPARABLE PARTS
View a parametric search of comparable parts.
EVALUATION KITS
ADL5363 Evaluation Board
DOCUMENTATION
Data Sheet
ADL5363: 2300 MHz to 2900 MHz Balanced Mixer, LO
Buffer and RF Balun Data Sheet
TOOLS AND SIMULATIONS
• ADIsimPLL™
ADIsimRF
REFERENCE MATERIALS
Product Selection Guide
RF Source Booklet
DESIGN RESOURCES
ADL5363 Material Declaration
PCN-PDN Information
Quality And Reliability
Symbols and Footprints
DISCUSSIONS
View all ADL5363 EngineerZone Discussions.
SAMPLE AND BUY
Visit the product page to see pricing options.
TECHNICAL SUPPORT
Submit a technical question or find your regional support
number.
DOCUMENT FEEDBACK
Submit feedback for this data sheet.
This page is dynamically generated by Analog Devices, Inc., and inserted into this data sheet. A dynamic change to the content on this page will not
trigger a change to either the revision number or the content of the product data sheet. This dynamic page may be frequently modified.



Analog Devices ADL5363
ADL5363
TABLE OF CONTENTS
Features .............................................................................................. 1
Applications....................................................................................... 1
General Description ......................................................................... 1
Functional Block Diagram .............................................................. 1
Revision History ............................................................................... 2
Specifications..................................................................................... 3
5 V Performance ........................................................................... 4
3.3 V Performance........................................................................ 4
Absolute Maximum Ratings............................................................ 5
ESD Caution.................................................................................. 5
Pin Configuration and Function Descriptions............................. 6
Typical Performance Characteristics ............................................. 7
5 V Performance ........................................................................... 7
REVISION HISTORY
2/15—Rev. 0 to Rev. A
Deleted Figure 37 and Figure 38................................................... 13
Deleted Bias Resistor Selection Section....................................... 19
Changes to Figure 48...................................................................... 20
Changes to Table 7.......................................................................... 21
Updated Outline Dimensions ....................................................... 23
Changes to Ordering Guide .......................................................... 23
7/10—Revision 0: Initial Version
Data Sheet
3.3 V Performance...................................................................... 14
Upconversion.............................................................................. 15
Spurious Performance ............................................................... 16
Circuit Description......................................................................... 17
RF Subsystem.............................................................................. 17
LO Subsystem ............................................................................. 18
Applications Information .............................................................. 19
Basic Connections...................................................................... 19
IF Port .......................................................................................... 19
Mixer VGS Control DAC .......................................................... 19
Evaluation Board ............................................................................ 20
Outline Dimensions ....................................................................... 23
Ordering Guide .......................................................................... 23
Rev. A | Page 2 of 24







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)