DatasheetsPDF.com

DC/DC Converters. D221RP Datasheet

DatasheetsPDF.com

DC/DC Converters. D221RP Datasheet






D221RP Converters. Datasheet pdf. Equivalent




D221RP Converters. Datasheet pdf. Equivalent





Part

D221RP

Description

D200RP Series / Short Circuit Protected Regulated / 2W SIP DC/DC Converters



Feature


D200RP Series Short Circuit Protected Re gulated, 2W SIP DC/DC Converters Electr ical Specifications Specifications ty pical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifications subject to chan ge without notice. Input Key Features : ● 2W Output Power ● Short Circuit Protection ● Tight Line/Load Regulat ion ● 1,000 VDC Isolation ● Min.
Manufacture

MicroPower Direct

Datasheet
Download D221RP Datasheet


MicroPower Direct D221RP

D221RP; iature SIP Case ● >1.5 MHour MTBF ● 15 Standard Models Parameter Input Vol tage Range Input Filter Reverse Polarit y Input Current Conditions 5 VDC Input 12 VDC Input 24 VDC Input Min. 4.5 10 .8 21.6 Typ. 5.0 12.0 24.0 Max. 5.5 1 3.2 26.4 0.3 Units VDC π (Pi) Filter A Units % % % mV P - P % ±0.02 Contin uous Conditions 60 Seconds 500 VDC 100 kHz, 1V Min. 1,000 1,000.


MicroPower Direct D221RP

60 40 Conditions Ambient Case Min. -25 -25 -40 Free Air Convection RH, Non-con densing 95 % Typ. +25 Max. +71 +85 +125 Typ. Max. Units VDC MΩ pF kHz Units C ºC ºC %/ºC Output Parameter Outp ut Voltage Accuracy Line Regulation Loa d Regulation (Note 1) Ripple & Noise (2 0 MHz) (Note 2) Output Power Protection Temperature Coefficient Output Short Circuit 120 For Vin Min t.


MicroPower Direct D221RP

o Max Conditions Min. Typ. Max. ±2.0 ± 0.5 ±0.5 75 General Parameter Isolati on Voltage Isolation Resistance Isolati on Capacitance Switching Frequency Env ironmental Parameter Operating Temperat ure Range Operating Temperature Range S torage Temperature Range Cooling Humidi ty MicroPower Direct 232 Tosca Drive S toughton, MA 02072 USA T: (781) 344-822 6 F: (781) 344-8481 E.

Part

D221RP

Description

D200RP Series / Short Circuit Protected Regulated / 2W SIP DC/DC Converters



Feature


D200RP Series Short Circuit Protected Re gulated, 2W SIP DC/DC Converters Electr ical Specifications Specifications ty pical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifications subject to chan ge without notice. Input Key Features : ● 2W Output Power ● Short Circuit Protection ● Tight Line/Load Regulat ion ● 1,000 VDC Isolation ● Min.
Manufacture

MicroPower Direct

Datasheet
Download D221RP Datasheet




 D221RP
D200RP Series
Short Circuit Protected
Regulated, 2W SIP
DC/DC Converters
Electrical Specifications
Specifications typical @ +25°C, nominal input voltage & rated output current, unless otherwise noted. Specifications subject to change without notice.
Key Features:
Input
Parameter
Conditions
Min. Typ. Max. Units
2W Output Power
5 VDC Input 4.5 5.0 5.5
Short Circuit Protection Input Voltage Range
12 VDC Input 10.8 12.0 13.2
VDC
Tight Line/Load Regulation
1,000 VDC Isolation
Miniature SIP Case
>1.5 MHour MTBF
15 Standard Models
Input Filter
Reverse Polarity Input Current
Output
Parameter
Output Voltage Accuracy
24 VDC Input 21.6 24.0 26.4
π (Pi) Filter
0.3
A
Conditions
Min. Typ. Max.
±2.0
Units
%
Line Regulation
For Vin Min to Max
±0.5 %
Load Regulation (Note 1)
±0.5 %
Ripple & Noise (20 MHz) (Note 2)
75 mV P - P
Output Power Protection
120 %
Temperature Coefficient
±0.02 %/ºC
Output Short Circuit
Continuous
General
Parameter
Conditions
Min. Typ. Max. Units
Isolation Voltage
60 Seconds 1,000
VDC
Isolation Resistance
500 VDC 1,000
Isolation Capacitance
100 kHz, 1V
60
pF
Switching Frequency
40 kHz
Environmental
Parameter
Conditions
Min. Typ. Max. Units
Operating Temperature Range
Ambient -25 +25 +71
ºC
Operating Temperature Range
Case -25
+85 ºC
Storage Temperature Range
-40
+125
ºC
Cooling
Free Air Convection
Humidity
RH, Non-condensing
95 %
MicroPower Direct
232 Tosca Drive
Stoughton, MA 02072
USA
Physical
Case Size
Case Material
Weight
1.26 x 0.32 x 0.55 Inches (32.0 x 8.0 x 14.0 mm)
Non-Conductive Black Plastic (UL94-V0)
0.17 Oz (4.8g)
T: (781) 344-8226
F: (781) 344-8481
E: sales@micropowerdirect.com
W: www.micropowerdirect.com
Reliability Specifications
Parameter
MTBF
Absolute Maximum Ratings
Conditions
Min. Typ. Max.
MIL HDBK 217F, 25ºC, Gnd Benign 1.5
Units
MHours
Parameter
Conditions
Min. Typ. Max. Units
5 VDC Input -0.7
9.0
Input Voltage Surge (1 Sec)
12 VDC Input -0.7
18.0 VDC
24 VDC Input -0.7
30.0
Lead Temperature
1.5 mm From Case For 10 Sec
260 ºC
Internal Power Dissipation
All Models
450 mW
Caution: Exceeding Absolute Maximum Ratings may damage the module. These are not continuous operating ratings.




 D221RP
Model Selection Guide
Model
Number
Input
Voltage (VDC)
Current (mA)
Nominal Range Full-Load No-Load
Voltage
(VDC)
Output
Current
(mA, Max)
D201RP
5
4.5 - 5.5
606
80
5.0 400.0
D202RP
5
4.5 - 5.5
606
80
9.0 222.0
D203RP
5
4.5 - 5.5
571
80
12.0 167.0
D204RP
5
4.5 - 5.5
571
80
15.0 133.0
D205RP
5
4.5 - 5.5
588
80
24.0 83.0
D211RP
12 10.8 - 13.2 253
45
5.0 400.0
D212RP
12 10.8 - 13.2 253
45
9.0 222.0
D213RP
12 10.8 - 13.2 238
45
12.0 167.0
D214RP
12 10.8 - 13.2 238
45
15.0 133.0
D215RP
12 10.8 - 13.2 246
45
24.0 83.0
D221RP
24 21.6 - 26.4 130
25
5.0 400.0
D222RP
24 21.6 - 26.4 130
25
9.0 222.0
D223RP
24 21.6 - 26.4 122
25
12.0 167.0
D224RP
24 21.6 - 26.4 122
25
15.0 133.0
D225RP
24 21.6 - 26.4 118
Notes:
1. Output load regulation is specified for a load change
of 20% to 100%.
2. When measuring output ripple, it is recommended
that an external 0.33 μF ceramic capacitor be placed
from the +Vout pin to the -Vout pin.
3. Operation at no-load will not damage these units.
However, they may not meet all specifications.
4. These do not require external components to operate,
but the use of a low ESR capacitor (approximately
10 uF, ESR <1.0Ω at 100 kHz) mounted close to the
converter input pins is recommended.
5. It is recommended that a fuse be used on the input of
a power supply for protection. See the table above for
the correct rating.
25 24.0 83.0
Derating Curve
Current
(mA, Min)
40.0
22.0
17.0
13.0
10.0
40.0
22.0
17.0
13.0
10.0
40.0
22.0
17.0
13.0
10.0
Efficiency
(%, Typ)
66
66
70
70
68
66
66
70
70
68
64
64
68
68
70
Fuse Rating
Slow-Blow
(mA)
1,000
1,000
1,000
1,000
1,000
500
500
500
500
500
200
200
200
200
200
Capacitive
Load
μF Max
470
Pin Connections
Pin Function
1 +Vin
2 NC
3 NC
9 NC
10 -Vout
11 +Vout
12 -Vin
NC: No Connection
Mechanical Dimensions
Notes:
All dimensions are typical in inches (mm)
Tolerance x.xx = ±0.01 (±0.25)
Pin 1 is marked by a “dot” or indentation on the side of the unit
MicroPower Direct
www.micropowerdirect.com
232 Tosca Drive Stoughton, MA 02072
TEL: (781) 344-8226 FAX: (781) 344-8481
E-Mail: sales@micropowerdirect.com







Recommended third-party D221RP Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)