UART/FIFO IC. FT2232H Datasheet

FT2232H IC. Datasheet pdf. Equivalent

Part FT2232H
Description Dual High Speed USB to Multipurpose UART/FIFO IC
Feature FT2232H Dual High Speed USB to Multipurpose UART/FIFO IC Datasheet Version 2.6 Document No.: FT_0000.
Manufacture FTDI
Datasheet
Download FT2232H Datasheet



FT2232H
FT2232H Dual High Speed USB to Multipurpose UART/FIFO IC Datasheet
Version 2.6
Document No.: FT_000061 Clearance No.: FTDI#77
Future Technology
Devices International Ltd
FT2232H Dual High Speed
USB to Multipurpose
UART/FIFO IC
The FT2232H is FTDI’s 5th generation of USB
devices. The FT2232H is a USB 2.0 High Speed
(480Mb/s) to UART/FIFO IC. It has the capability of
being configured in a variety of industry standard
serial or parallel interfaces. The FT2232H has the
following advanced features:
Single chip USB to dual serial / parallel ports
with a variety of configurations.
Entire USB protocol handled on the chip. No
USB specific firmware programming required.
USB 2.0 High Speed (480Mbits/Second) and
Full Speed (12Mbits/Second) compatible.
Dual Multi-Protocol Synchronous Serial Engine
(MPSSE) to simplify synchronous serial protocol
(USB to JTAG, I2C, SPI or bit-bang) design.
Dual independent UART or FIFO or MPSSE
ports.
Independent Baud rate generators.
RS232/RS422/RS485 UART Transfer Data Rate
up to 12Mbaud. (RS232 Data Rate limited by
external level shifter).
USB to parallel FIFO transfer data rate up to 8
Mbyte/Sec.
Single channel synchronous FIFO mode for
transfers upto 40 Mbytes/Sec
CPU-style FIFO interface mode simplifies CPU
interface design.
MCU host bus emulation mode configuration
option.
Fast Opto-Isolated serial interface option.
FTDI’s royalty-free Virtual Com Port (VCP) and
Direct (D2XX) drivers eliminate the
requirement for USB driver development in
most cases.
Adjustable receive buffer timeout.
Option for transmit and receive LED drive
signals on each channel.
Enhanced bit-bang Mode interface option with
RD# and WR# strobes
FT245B-style FIFO interface option with bi-
directional data bus and simple 4 wire
handshake interface.
Highly integrated design includes +1.8V LDO
regulator for VCORE, integrated POR function
and on chip clock multiplier PLL (12MHz
480MHz).
Asynchronous serial UART interface option with
full hardware handshaking and modem
interface signals.
Fully assisted hardware or X-On / X-Off
software handshaking.
UART Interface supports 7/8 bit data, 1/2 stop
bits, and Odd/Even/Mark/Space/No Parity.
Auto-transmit enable control for RS485 serial
applications using TXDEN pin.
Operational configuration mode and USB
Description strings configurable in external
EEPROM over the USB interface.
Configurable I/O drive strength (4, 8, 12 or
16mA) and slew rate.
Low operating and USB suspend current.
Supports bus powered, self-powered and high-
power bus powered USB configurations.
UHCI/OHCI/EHCI host controller compatible.
USB Bulk data transfer mode (512 byte packets
in High Speed mode).
+1.8V (chip core) and +3.3V I/O interfacing
(+5V Tolerant).
Extended -40°C to 85°C industrial operating
temperature range.
Compact 64-LD Lead Free LQFP or QFN
package
Available in compact Pb-free 56 Pin VQFN
packages (RoHS compliant)
+3.3V single supply operating voltage range.
ESD protection for FT2232H IO’s:
Human Body Model (HBM) ±2kV,
Machine Mode (MM) ±200V,
Charge Device Model (CDM) ±500V,
Latch-up free.
Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced in any material or
electronic form without the prior written consent of the copyright holder. This product and its documentation are supplied on an as-is basis and no warranty as
to their suitability for any particular purpose is either made or implied. Future Technology Devices International Ltd will not accept any claim for damages
howsoever arising as a result of use or failure of this product. Your statutory rights are not affected. This product or any variant of it is not intended for use in
any medical appliance, device or system in which the failure of the product might reasonably be expected to result in personal injury. This document provides
preliminary information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by the
publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH, United
Kingdom. Scotland Registered Company Number: SC136640
Copyright © Future Technology Devices International Limited
1



FT2232H
FT2232H Dual High Speed USB to Multipurpose UART/FIFO IC Datasheet
Version 2.6
Document No.: FT_000061 Clearance No.: FTDI#77
1 Typical Applications
Single chip USB to dual channel UART (RS232,
RS422 or RS485).
Single chip USB to dual channel FIFO.
Single chip USB to dual channel JTAG.
Single chip USB to dual channel SPI.
Single chip USB to dual channel I2C.
Single chip USB to dual channel Bit-Bang.
Single chip USB to dual combination of any of
above interfaces.
Single chip USB to Fast Serial Optic Interface.
Single chip USB to CPU target interface (as
memory), double and independent.
Single chip USB to Host Bus Emulation (as
CPU).
PDA to USB data transfer
USB Smart Card Readers
USB Instrumentation
USB Industrial Control
USB MP3 Player Interface
USB FLASH Card Reader / Writers
Set Top Box PC - USB interface
USB Digital Camera Interface
USB Bar Code Readers
1.1 Driver Support
The FT2232H requires USB drivers (listed below), available free from http://www.ftdichip.com, which are
used to make the FT2232H appear as a virtual COM port (VCP). This allows the user to communicate with
the USB interface via a standard PC serial emulation port (for example TTY). Another FTDI USB driver,
the D2XX driver, can also be used with application software to directly access the FT2232H through a
DLL.
Royalty free VIRTUAL COM PORT
(VCP) DRIVERS for...
Royalty free D2XX Direct Drivers
(USB Drivers + DLL S/W Interface)
Windows 10 32,64-bit
Windows 10 32,64-bit
Windows 8/8.1 32,64-bit
Windows 8/8.1 32,64-bit
Windows 7 32,64-bit
Windows 7 32,64-bit
Windows Vista and Vista 64-bit
Windows Vista and Vista 64-bit
Windows XP and XP 64-bit
Windows XP and XP 64-bit
Windows 98, 98SE, ME, 2000, Server 2003, XP, Windows 98, 98SE, ME, 2000, Server 2003, XP,
Server 2008 and server 2012 R2
Server 2008 and server 2012 R2
Windows XP Embedded
Windows XP Embedded
Windows CE 4.2, 5.0 and 6.0
Windows CE 4.2, 5.0 and 6.0
Mac OS 8/9, OS-X
Linux 2.4 and greater
Linux 2.4 and greater
Android(J2xx)
For driver installation, please refer to the installation guides on our website:
http://www.ftdichip.com/Support/Documents/InstallGuides.htm
The following additional installation guides application notes and technical notes are also available:
AN_113, “Interfacing FT2232H Hi-Speed Devices to I2C Bus”.
AN_109 – “Programming Guide for High Speed FTCI2C DLL”
AN_110 – “Programming Guide for High Speed FTCJTAG DLL”
AN_111 – “Programming Guide for High Speed FTCSPI DLL”
AN114 – “Interfacing FT2232H Hi-Speed Devices To SPI Bus
AN135 MPSSE Basics
AN108 - Command Processor For MPSSE and MCU Host Bus Emulation Modes
TN_104, “Guide to Debugging Customers Failed Driver Installation”
Copyright © Future Technology Devices International Limited
2





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)