DatasheetsPDF.com

5P49V5923

Renesas
Part Number 5P49V5923
Manufacturer Renesas
Description Programmable Clock Generator
Published Jan 19, 2020
Detailed Description Programmable Clock Generator 5P49V5923 DATASHEET Description The 5P49V5923 is a programmable clock generator intended...
Datasheet PDF File 5P49V5923 PDF File

5P49V5923
5P49V5923


Overview
Programmable Clock Generator 5P49V5923 DATASHEET Description The 5P49V5923 is a programmable clock generator intended for high performance consumer, networking, industrial, computing, and data-communications applications.
Configurations may be stored in on-chip One-Time Programmable (OTP) memory or changed using I2C interface.
This is IDT’s fifth generation of programmable clock technology (VersaClock® 5).
The frequencies are generated from a single reference clock.
The reference clock can come from one of the two redundant clock inputs.
A glitchless manual switchover function allows one of the redundant clocks to be selected during normal operation.
Two select pins allow up to 4 different configurations to be programmed and accessible using processor GPIOs or bootstrapping.
The different selections may be used for different operating modes (full function, partial function, partial power-down), regional standards (US, Japan, Europe) or system production margin testing.
The device may be configured to use one of two I2C addresses to allow multiple devices to be used in a system.
Pin Assignment OUT0_SEL_I2CB VDDO0 VDDD VDDO1 OUT1 NC CLKIN CLKINB XOUT XIN/REF VDDA CLKSEL 1 24 23 22 21 20 19 18 2 17 3 EPAD 16 4 GND 15 5 14 6 13 7 8 9 10 11 12 VDDO2 OUT2 NC VDDA NC NC Features • Generates up to two independent output frequencies • High performance, low phase noise PLL, <0.
7 ps RMS typical phase jitter on outputs • Two fractional output dividers (FODs) • Independent Spread Spectrum capability on each output • Four banks of internal non-volatile in-system programmable or factory programmable OTP memory • I2C serial programming interface • Three LVCMOS outputs, including one reference output • I/O Standards: – Single-ended I/Os: 1.
8V to 3.
3V LVCMOS • Input frequency ranges: – LVCMOS Reference Clock Input (XIN/REF) – 1MHz to 200MHz – LVDS, LVPECL, HCSL Differential Clock Input (CLKIN, CLKINB) – 1MHz to 200MHz – Crystal frequency range: 8MHz to 40MHz • Ou...



Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)