DatasheetsPDF.com

1300

Nihon Dempa Kogyo
Part Number 1300
Manufacturer Nihon Dempa Kogyo
Description Crystal Clock Oscillators
Published Aug 23, 2005
Detailed Description CRYSTAL CLOCK OSCILLATORS WARRANTY CLAUSE s 1300 Series No. 1 2 3 4 5 6 7 8 9 Item Vibration Test Shock Test Drop Test H...
Datasheet PDF File 1300 PDF File

1300
1300

Overview
CRYSTAL CLOCK OSCILLATORS WARRANTY CLAUSE s 1300 Series No.
1 2 3 4 5 6 7 8 9 Item Vibration Test Shock Test Drop Test Humidity Test Solder Heat Test Thermal Shock Test Terminal Strength Test Soldering Test Solvent Resistance MIL-STD-202F, TM204D, condition B MIL-STD-202F, TM213B, condition 9,800m/s2 0.
5 ms 3 times natural drops on to hard wooden board from the height (see 4 ) MIL-STD-202F, TM103B, condition A MIL-STD-202F, TM210A, condition B (260°C ± 5°C for 10 ± 1 seconds) Expose to 100 cycles of extreme temperatures, that is, –40°C for 30 minutes then +85°C for 30 minutes.
MIL-STD-202F, TM211A, condition A (Pull Weighting 0.
907 kg) and condition C (Bend Weighting 0.
45 kg) Soaking in the soldering bath at +235±5°C for 5±1 seconds More than 90% of lead should be covered by solder.
After soaking in alcohol for 30 minutes.
The markings are not faded out.
F/F < = ±10×10-6 Condition Specification Please see below note.
(*) Please see below note.
(*) Please see below note.
(*) Please see below note.
(*) Please see below note.
(*) Please see below note.
(*) (*) After the tests mentioned above, the electrical specifications are satisfied.
Also frequency deviation before and after test should be The electrical specifications are frequency tolerance, Lcc, Tr/Tf, VOL/VOH, duty cycle.
Model 1300 Height 50 cm s 1600 Series No.
1.
2.
Item P.
C Test Thermal Shock Test Heat Cycle Test High Temperature High Humidity Test +85°C Aging (non operated) Vibration Test Shock Test Condition Temperature: +121±2°C, Pressure: 2 Atmospheric pressure, Time: 48 Hours 1Cycle: –55°C (30minutes)~+125°C (30minutes) Number of Cycle: 15 cycles is gas phase 1Cycle: –55°C ~ +25°C ~ +125°C ~ +25°C (30 minutes) (10 minutes) (30 minutes) (10 minutes) Specification Please see below note.
(*) Please see below note.
(*) Please see below note.
(*) Please see below note.
(*) Please see below note.
(*) Please see below note.
(*) Please see below note.
(*) Please see below note.
(*) More than 90% of lead or Pad shoul...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)