DatasheetsPDF.com

ICSSSTUAH32865A

IDT
Part Number ICSSSTUAH32865A
Manufacturer IDT
Description 25-BIT CONFIGURABLE REGISTERED BUFFER
Published Oct 2, 2007
Detailed Description www.DataSheet4U.com DATASHEET 28-BIT 1:2 REGISTERED BUFFER FOR DDR2 IDT74SSTUBH32865A The IDT74SSTUBH32865A includes ...
Datasheet PDF File ICSSSTUAH32865A PDF File

ICSSSTUAH32865A
ICSSSTUAH32865A

Overview
www.
DataSheet4U.
com DATASHEET 28-BIT 1:2 REGISTERED BUFFER FOR DDR2 IDT74SSTUBH32865A The IDT74SSTUBH32865A includes a parity checking function.
The IDT74SSTUBH32865A accepts a parity bit from the memory controller at its input pin PARIN, compares it with the data received on the D-inputs and indicates whether a parity error has occurred on its open-drain PTYERR pin (active LOW).
Description This 28-bit 1:2 registered buffer with parity is designed for 1.
7V to 1.
9V VDD operation.
All clock and data inputs are compatible with the JEDEC standard for SSTL_18.
The control inputs are LVCMOS.
All outputs are 1.
8 V CMOS drivers that have been optimized to drive the DDR2 DIMM load.
The IDT74SSTUBH32865A operates from a differential clock (CLK and CLK).
Data are registered at the crossing of CLK going high, and CLK going low.
The device supports low-power standby operation.
When the reset input (RESET) is low, the differential input receivers are disabled, and undriven (floating) data, clock and reference voltage (VREF) inputs are allowed.
In addition, when RESET is low all registers are reset, and all outputs except PTYERR are forced low.
The LVCMOS RESET input must always be held at a valid logic high or low level.
To ensure defined outputs from the register before a stable clock has been supplied, RESET must be held in the low state during power up.
In the DDR2 RDIMM application, RESET is specified to be completely asynchronous with respect to CLK and CLK.
Therefore, no timing relationship can be guaranteed between the two.
When entering reset, the register will be cleared and the outputs will be driven low quickly, relative to the time to disable the differential input receivers.
However, when coming out of reset, the register will become active quickly, relative to the time to enable the differential input receivers.
As long as the data inputs are low, and the clock is stable during the time from the low-to-high transition of RESET until the input receivers are full...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)